Hello.
I buy recently a Nord C1, with many scrapes on the Wood red side panels.
I think to make a restoration.
For dismantling is only enough unscrew the wood side panels?
Best regards
Smithy
10 posts
• Page 1 of 1
- Smithy
- Posts: 2
- Joined: 26 Apr 2012, 17:34
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord C1
Re: Nord C1 dismantling
Smithy wrote:For dismantling is only enough unscrew the wood side panels?
Hello Smithy,
Welcome to the forums
I believe that removal of the 6 screws on each side should be sufficient for the wood end panels
Cheers, Hanon
Last edited by Hanon_CTS on 31 Jul 2012, 12:31, edited 3 times in total.
- The author Hanon_CTS was thanked by:
- robnuckels
-
Hanon_CTS - Former Team Member
- Posts: 1934
- Joined: 02 Mar 2011, 17:58
- Has thanked: 683 times
- Been thanked: 477 times
- Your Nord Gear #1: Other Brand
- Your Nord Gear #2: Other Brand
Re: Nord C1 dismantling
Thanks. i try and reply with the results
Best regards
Best regards
Last edited by Smithy on 31 Jul 2012, 12:31, edited 2 times in total.
- Smithy
- Posts: 2
- Joined: 26 Apr 2012, 17:34
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord C1
Re: Nord C1 dismantling
Smithy wrote:Thanks. i try and reply with the results
Best regards
upload some pics of the process if possible.
Cheers, Hanon
Last edited by Hanon_CTS on 31 Jul 2012, 12:31, edited 2 times in total.
-
Hanon_CTS - Former Team Member
- Posts: 1934
- Joined: 02 Mar 2011, 17:58
- Has thanked: 683 times
- Been thanked: 477 times
- Your Nord Gear #1: Other Brand
- Your Nord Gear #2: Other Brand
Re: Nord C1 dismantling
As much as I love that red wood on my C2, sometimes I wish it was flat black, crinkle black, or even molded plastic. As careful as I am (hard case, polish) it's still gonna get dinged, I know it! When the bassist or similiar comes near (to look at a lead sheet or chord-lyric chart on the organ) I can't help it, I throw my arms around the sides and hiss: "Watch the wood, goddamit! Watch the wood!" Belt buckles terrify me! Mike stands make me quake!
I insist the horn player put a rubber grommet around the bell of his horn, so we can have safe sax.
I insist the horn player put a rubber grommet around the bell of his horn, so we can have safe sax.
Last edited by Mooser on 31 Jul 2012, 12:31, edited 3 times in total.
- Mooser
- Posts: 363
- Joined: 07 Oct 2011, 20:01
- Has thanked: 149 times
- Been thanked: 55 times
- Your Nord Gear #1: Nord C2
Re: Nord C1 dismantling
Mooser wrote:I insist the horn player but a rubber grommet on the bell of his horn, so we can have safe sax.
Last edited by stiiiiiiive on 31 Jul 2012, 12:31, edited 2 times in total.
- The author stiiiiiiive was thanked by:
- Mooser
-
stiiiiiiive - Posts: 664
- Joined: 14 Oct 2011, 15:07
- Has thanked: 67 times
- Been thanked: 132 times
- Your Nord Gear #1: Nord Modular
- Your Nord Gear #2: Nord Electro 4
Re: Nord C1 dismantling
I pulled off the sides of my C2. Sanded the clear coat off, and primed them. Same with the top panel and backside. Then three super light and even coats with black spray paint, followed up with 2 coats of spray polyurethane ( 3 coats on the sides). It looks great, and has held up really well. Don't both doing this unless you add a protective clear coat on top because it'll scratch easily. I have a few chip and that red come shining through. Pretty soon, I'm going to sand it all down again and oak veneer the top and backside and have side panels in oak to match. Dark stain and many coats of poly. Can't wait...
Here's some shots of it in black.
Here's some shots of it in black.
- Attachments
-
- 425465_429937250383964_1956190435_n.jpg (124.61 KiB) Viewed 2743 times
-
- 9ededcbabab111e18bb812313804a181_7.jpg (88.92 KiB) Viewed 2743 times
Last edited by BravoJr on 31 Jul 2012, 12:31, edited 3 times in total.
Nord C2, NE 3, Rhodes Mk V, Memotron, Moog Slim Phatty, Moog Little Phatty, MicroKorg XL, Hammond XK3C, Hammond M3, Leslies 860/760, Fender Deluxe Reverb.
-
BravoJr - Posts: 46
- Joined: 07 Nov 2011, 11:01
- Location: Vancouver BC
- Country:
- Has thanked: 21 times
- Been thanked: 29 times
- Your Nord Gear #1: Nord C2
- Your Nord Gear #2: Nord Electro 3
Re: Nord C1 dismantling
BravoJr wrote:I pulled off the sides of my C2. Sanded the clear coat off, and primed them. Same with the top panel and backside. Then three super light and even coats with black spray paint, followed up with 2 coats of spray polyurethane ( 3 coats on the sides). It looks great, and has held up really well. Don't both doing this unless you add a protective clear coat on top because it'll scratch easily. I have a few chip and that red come shining through. Pretty soon, I'm going to sand it all down again and oak veneer the top and backside and have side panels in oak to match. Dark stain and many coats of poly. Can't wait...
Now that's an individualized instrument. Hmm, how about a hot pink Mellotron? No?
Last edited by mjbrands on 31 Jul 2012, 12:31, edited 2 times in total.
- mjbrands
Re: Nord C1 dismantling
BravoJr, looks like you're in Vancouver - what band is that?
Last edited by hammondking on 31 Jul 2012, 12:31, edited 2 times in total.
Nord Stage 3 Compact
Yamaha YC73
Crumar Mojo 61 Reverse
Clavinet D6
Rhodes Stage 88
Rhodes Home Piano
Yamaha Reface CP
StudioLogic SL73 Studio
Alesis Vortex 2 Wireless
Yamaha SonoGenic SHS-500
Yamaha YC73
Crumar Mojo 61 Reverse
Clavinet D6
Rhodes Stage 88
Rhodes Home Piano
Yamaha Reface CP
StudioLogic SL73 Studio
Alesis Vortex 2 Wireless
Yamaha SonoGenic SHS-500
- hammondking
- Posts: 111
- Joined: 03 Apr 2011, 06:07
- Country:
- Has thanked: 1 time
- Been thanked: 21 times
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Nord Stage 3
Re: Nord C1 dismantling
Yes, we're from Vancouver. The band name is "The Gay Nineties".
Last edited by BravoJr on 31 Jul 2012, 12:31, edited 1 time in total.
Nord C2, NE 3, Rhodes Mk V, Memotron, Moog Slim Phatty, Moog Little Phatty, MicroKorg XL, Hammond XK3C, Hammond M3, Leslies 860/760, Fender Deluxe Reverb.
-
BravoJr - Posts: 46
- Joined: 07 Nov 2011, 11:01
- Location: Vancouver BC
- Country:
- Has thanked: 21 times
- Been thanked: 29 times
- Your Nord Gear #1: Nord C2
- Your Nord Gear #2: Nord Electro 3
10 posts
• Page 1 of 1
Return to Nord C1 / C2 / C2D Organ Forum
Who is online
Users browsing this forum: No registered users and 5 guests