A few answers below:
>> Is it possible to separate the two sounds
"BD" and
"Snare+Claps" to have them on independend keys?
YES
>>How many split zone are possible?
With a sample every key can have a different sound, so you can set up your sample according to how you want to use it on your Electro 6.
>>And what software do I use to build samples like this and convert them at the end to a NORD conform format? Is there already a manual in the forum ?
At this link you can download the Nord Sample Editor 4 application and read their online guide: website
https://www.nordkeyboards.com/software- ... e-editor-4To create the separate sounds you need,
- open the NSE4 software,
- either a) load the original clip (saved as a WAV file) into NSE4 (drag-n-drop directly to a key also works well in this case), or b) record the sound directly into your laptop from your Electro 6,
- copy the clip to the keys you want,
- modify the start and stop time of the clip used for each key to have one key cover just the "BD" and the other cover the "Snare+Claps",
- set the keyboard range you want for each sound and set the key samples as "unpitched". For example, if you assigned BD to key C3 and the Snare+Claps to D3, the actual range of the BD sound can be all notes below C3 and C#3, and the range for the Snare+Claps could be D3 and above. "Unpitched" is needed otherwise the sound on will be interpolated and sound like a recording being slowed down or sped up depending on whether below or above the root key used.
As there's more to creating a sample than just the basic steps above, I'd suggest reading the online guide first to help fill in the blanks. I hope this helps, good luck!
Mobile
Donate