Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby Tracii » 25 Nov 2021, 11:36

Again, no luck. I've tried every MIDI channel assignment I could think of, but the only way it works is when the db-1 sends on the Electro's Global channel - and then there is no way of assigning it to one Part and that Part only.

I'm going to write to Nord about this, maybe there is something else to consider. :)
User avatar
Tracii
 
Posts: 145
Joined: 12 Feb 2018, 11:47
Country: Germany
Has thanked: 100 times
Been thanked: 27 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Nord Electro 3

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?


Sponsor
 

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby Tracii » 25 Nov 2021, 15:40

Straight from the horse's mouth:

Clavia Support wrote:Hi Fabian,

I’m afraid that it’s not possible to achieve what you’re looking for, since CC data is only sent and listened to on the global MIDI channel. The only potential “workaround” I can think of is to also send the CC for changing between Preset 1 & 2 before changing drawbar settings, but that might not be suitable in your case…

Let us know if there is anything else, and hope you can find a setup that works for you!

Best regards,


So, no direct way to do this. I'll see into the workaround suggested - any ideas?
User avatar
Tracii
 
Posts: 145
Joined: 12 Feb 2018, 11:47
Country: Germany
Has thanked: 100 times
Been thanked: 27 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Nord Electro 3

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby maxpiano » 25 Nov 2021, 16:33

Uhm... I would challenge them then on what is actually listened to on the Lower Receive channel then, just Notes?

Quite a limited implementation, if that's the case and not in line with what manual states about "CHANNEL LOWER RECEIVE determines the MIdI channel which Part lower responds to"., which is what made me think that the whole lower part can be controlled, not just notes :|
Last edited by maxpiano on 25 Nov 2021, 16:38, edited 2 times in total.
User avatar
maxpiano
Patch Creator
 
Posts: 4365
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 305 times
Been thanked: 1496 times
Your Nord Gear #1: Nord Electro 6

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby vcfvca » 30 Nov 2021, 20:21

The Electro 4 was the last model 2 support 2 sets of drawbars. The Upper Manual uses CCs 16-24 and the Lower set 70-78. Why Nord chamged it for the E5 and E6 I don't know as it is now impossible to control the Lower drawbars as both manuals use CCs 16-24. They don't even respond to separate MIDI Channels -at least that would work. I have a Crumar/GSi D9U and it will not control the lower manual on my NE6D even when set on Channel 2. I'm sure it was the same on my old NE5. Crazy. I am actually considering swapping my NE6D for a NE4D because the MIDI implementation for organ is so much better.

[EDIT] Still if you just want have preset 1 and 2 on separate drawbars that will work - just got to remember to hit the upper/lower button.
Last edited by vcfvca on 30 Nov 2021, 21:32, edited 2 times in total.

The author vcfvca was thanked by:
Tracii
vcfvca
 
Posts: 100
Joined: 22 Dec 2012, 18:57
Country: Great Britain
Has thanked: 14 times
Been thanked: 33 times
Your Nord Gear #1: Nord Electro 6

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby Tracii » Yesterday, 13:08

vcfvca wrote:The Electro 4 was the last model 2 support 2 sets of drawbars. The Upper Manual uses CCs 16-24 and the Lower set 70-78. Why Nord chamged it for the E5 and E6 I don't know as it is now impossible to control the Lower drawbars as both manuals use CCs 16-24. They don't even respond to separate MIDI Channels -at least that would work. I have a Crumar/GSi D9U and it will not control the lower manual on my NE6D even when set on Channel 2. I'm sure it was the same on my old NE5. Crazy. I am actually considering swapping my NE6D for a NE4D because the MIDI implementation for organ is so much better.

[EDIT] Still if you just want have preset 1 and 2 on separate drawbars that will work - just got to remember to hit the upper/lower button.

The C1/C2 organs also use CCs 16-24 for a set of drawbars on both manuals, but you can address them on their separate MIDI channels. So yeah, It's the combination of collapsing both sets of drawbars into one set of CCs and only listening to them on one (the global) channel - it's almost as if they did it on purpose, just so maddeningly and unnecessarily limiting. ;)

Unfortunately, going back to an Electro 4 or lower is not an option as they're monotimbral.
User avatar
Tracii
 
Posts: 145
Joined: 12 Feb 2018, 11:47
Country: Germany
Has thanked: 100 times
Been thanked: 27 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Nord Electro 3

Re: Ocean Beach Drawbars on Electro 5 for B3 kb split?

Postby anotherscott » Yesterday, 18:44

Tracii wrote:Unfortunately, going back to an Electro 4 or lower is not an option as they're monotimbral.
If you really want this capability, I wonder if maybe some/all of the Nord Stage series can do what you need? Or if you'd have to look at a non-Nord?
anotherscott
 
Posts: 3178
Joined: 07 Jan 2011, 04:50
Has thanked: 26 times
Been thanked: 972 times

Previous

Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 3 guests