Nord User Forum

Is there any way to get the current range of an existing morph, for dials (other than level encoders)?

It would logically make sense that you could double click one of the morph assign buttons to get the "morph assign" screen. Then hold monitor and turn an assigned dial to see the current range - but that doesn't work.

If you re-assign a morph value, the existing start value is shown - but the end value is replaced the moment you turn the dial.

Tom

From the A1 forum. I'm not sure if the Stage and A1 have the same behaviour. At least on my Electro the Shift button is used instead of the copy/monitor button.

starkaudio wrote:Ah, sorry.

To get the current value: hold "copy/monitor" and turn the knob. Same as always.

To get the morph value: hold "copy/monitor" and the desired morph button, then turn to knob to get the morph value.

-L

Hi CountFosco,

Thanks for the suggestion. Tried every combination of shift / monitor / morph controls but none would give the current range on the NS3

Tom

Here you go...

v1.44 (2018-08-23)
Morph ranges can now be monitored by pressing Monitor + Wheel/ATouch/Ctrl Ped button and turning a morphed parameter control.

anotherscott wrote:Here you go...

v1.44 (2018-08-23)
Morph ranges can now be monitored by pressing Monitor + Wheel/ATouch/Ctrl Ped button and turning a morphed parameter control.

True, except you have to press the MORPH button first, and then the MONITOR button, then turn the morphed parameter control.
If you press MONITOR first it will think you're trying to copy the morph assign.