My go-to "utility" program is a good starting point for other programs. This has piano, strings, bass, and B3 organ with drawbars on the mod wheel. Slot A has all but the bass; Slot B has left handed bass and piano/B3 on the right. The memory locations in my Nord Stage 2 EX for the samples used in the program are:
Slot A - 204 - "WarmPad1__CL stereo 2.0"
Slot B - 97 - "FndJazzPlectr_Preamp_ST mono 2.0"
Note that it doesn't matter which sample memory locations you store new samples in your Nord Stage 2, just make sure that after you load a program, that you point the Slot A and/or Slot B Synth to the correct sample in your system. For example, if you load "WarmPad1__CL stereo 2.0" into your sample location 140 (204 in mine) for the program below, then you just need to point Slot A to 140 rather than 204. I'll revise this post as needed based on questions, so feel free to comment.
Take care.
LINK "Stage 2 - For Those New To Programming" --> nord-stage-2-programs-ns2p-ns2pb-files-f15/stage-2-for-those-new-to-programming-t16863.html
Forum rules
How to get the MP3-Player:
Upload a MP3 file where you play some notes using your sample.
Click the "PLACE INLINE" button after uploading the MP3 sample in order to automatically create a Flash MP3 player in your post!
Also check the Forum Rules, in particular rule #6 about the sharing of programs and samples.
How to get the MP3-Player:
Upload a MP3 file where you play some notes using your sample.
Click the "PLACE INLINE" button after uploading the MP3 sample in order to automatically create a Flash MP3 player in your post!
Also check the Forum Rules, in particular rule #6 about the sharing of programs and samples.
5 posts
• Page 1 of 1
You'll Use This - My Stage 2 "Utility" Program
- Attachments
-
- Utility Program W.mp3
- Sample of "Utility W" program with piano, bass, strings, and B3 with drawbars on the mod wheel
- (523.83 KiB) Downloaded 6643 times
Last edited by WannitBBBad on 28 Dec 2018, 20:09, edited 4 times in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
- The author WannitBBBad was thanked by 3 members, including:
- bbinfor12 • Berretje • MEL868
-
WannitBBBad - Patch Creator
- Posts: 1809
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1049 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
Re: You'll Use This - My Stage 2 "Utility" Program
This is terrific info.
However I cannot figure out how to input the sounds on the MP3 into my stage 3. Would love to get your basic Utility and other programs you've posted in this group. Thank you
However I cannot figure out how to input the sounds on the MP3 into my stage 3. Would love to get your basic Utility and other programs you've posted in this group. Thank you
- amgems22
- Posts: 12
- Joined: 06 Dec 2011, 00:58
- Has thanked: 0 time
- Been thanked: 0 time
Re: You'll Use This - My Stage 2 "Utility" Program
Hi,
you cannot import a MP3 into the Nord Stage, you have to download the .nsmp files. These can be loaded into the Nord by using Nord Sound Manager. But you also cannot load the Nord Stage 2 program file (.ns2p) into the Stage 3, you must rebuild your own program.
However, I think Wannitbbbad has also created his utility program for the Stage 3, you can find it here:
nord-stage-3-programs-ns3p-ns3pb-files-f32/classic-rock-and-other-programs-set-3-t15745.html
Just download the file Utility_W.ns3f and transfer it to your Stage 3
you cannot import a MP3 into the Nord Stage, you have to download the .nsmp files. These can be loaded into the Nord by using Nord Sound Manager. But you also cannot load the Nord Stage 2 program file (.ns2p) into the Stage 3, you must rebuild your own program.
However, I think Wannitbbbad has also created his utility program for the Stage 3, you can find it here:
nord-stage-3-programs-ns3p-ns3pb-files-f32/classic-rock-and-other-programs-set-3-t15745.html
Just download the file Utility_W.ns3f and transfer it to your Stage 3
Last edited by Schorsch on 22 Jul 2019, 10:02, edited 4 times in total.
Regards Schorsch
Want to convert programs between NS2 and NS3?
Check this awesome website to visually view NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, NS3 88, KeyLargo, Vent II ..
Want to convert programs between NS2 and NS3?
Check this awesome website to visually view NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, NS3 88, KeyLargo, Vent II ..
- The author Schorsch was thanked by:
- WannitBBBad
-
Schorsch - Donator
- Posts: 2230
- Joined: 15 May 2018, 23:34
- Location: Germany - NRW
- Country:
- Has thanked: 1231 times
- Been thanked: 803 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 3
Re: You'll Use This - My Stage 2 "Utility" Program
Exactly what I needed.
Thanks so much for the direction, Schorsch!
Thanks so much for the direction, Schorsch!
- amgems22
- Posts: 12
- Joined: 06 Dec 2011, 00:58
- Has thanked: 0 time
- Been thanked: 0 time
Re: You'll Use This - My Stage 2 "Utility" Program
I hope all of you are doing well during these times. I thought I would share this program again that I've found useful for quite a few applications. I have over 20 programs available at the site as well. Take care.
LINK --> nord-stage-2-programs-ns2p-ns2pb-files-f15/stage-2-for-those-new-to-programming-t16863.html?hilit=20#p111530
LINK --> nord-stage-2-programs-ns2p-ns2pb-files-f15/stage-2-for-those-new-to-programming-t16863.html?hilit=20#p111530
Last edited by WannitBBBad on 23 Apr 2021, 16:38, edited 1 time in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
-
WannitBBBad - Patch Creator
- Posts: 1809
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1049 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
5 posts
• Page 1 of 1
Return to Nord Stage 2 Programs (*.ns2p files)
Who is online
Users browsing this forum: No registered users and 9 guests