Hi guys,
I have a generic M-Audio control pedal for keyboards and although it isn't in the preset list of control pedals in the System menu when I go to the controller settings 1-10 each the % moves from 0-100% when moving the pedal up and down. This suggest to me that the Electro 5D is reading the signal from the pedal.
What I want it to do is to work as a volume control for the lower or upper parts and I just can't get it to make any difference at all moving the pedal. I have even tried stepping up different % from 1-10. I am not sure why there are options 1-10?
Can anyone provide any advice or guidance? Is it possible to do what I want it to do?
Electro 5D Control Pedal Not working?
-
- Posts: 4
- Joined: 09 Oct 2019, 14:32
- 4
- Your Nord Gear #1: Nord Electro 5
- maxpiano
- Patch Creator
- Posts: 6300
- Joined: 27 Jun 2011, 13:29
- 12
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 451 times
- Been thanked: 2209 times
Re: Electro 5D Control Pedal Not working?
Hi,
you need to enable CtrlPedal on the Upper and/or Lower section you want to control (shift + Octave Up button of each section, as explained in NE5 manual Section 3 "Parts" chapter )
About that 1-10 setting you mention, it is the CONTROL PEDAL GAIN setting in the System menu, leave it to 1 as far as the pedal sweeps properly from 0 to 100% (again as suggested in the manual)
you need to enable CtrlPedal on the Upper and/or Lower section you want to control (shift + Octave Up button of each section, as explained in NE5 manual Section 3 "Parts" chapter )
About that 1-10 setting you mention, it is the CONTROL PEDAL GAIN setting in the System menu, leave it to 1 as far as the pedal sweeps properly from 0 to 100% (again as suggested in the manual)
Last edited by maxpiano on 09 Oct 2019, 16:08, edited 2 times in total.
-
- Posts: 4
- Joined: 09 Oct 2019, 14:32
- 4
- Your Nord Gear #1: Nord Electro 5
- maxpiano
- Patch Creator
- Posts: 6300
- Joined: 27 Jun 2011, 13:29
- 12
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 451 times
- Been thanked: 2209 times
Re: Electro 5D Control Pedal Not working?
and don't forget to RTM (withouth "F")Drhigh5 wrote:Thank you it was the Shift+Octave Up I was missing!