Any ideas about where to get a METAL replacement for the plastic NordPad Mount? The screw holes in the Gibraltar and Roland ones don't line up.
Cheers
T14
ND Pad Replacement Mount
-
- Posts: 2
- Joined: 28 Mar 2015, 20:38
- 10
- Your Nord Gear #1: Nord Drum 2
- Your Nord Gear #2: Nord Drum
-
- Moderator
- Posts: 772
- Joined: 19 Mar 2009, 18:32
- 16
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
- Has thanked: 88 times
- Been thanked: 225 times
Re: ND Pad Replacement Mount
Yes, the ‘universal’ Gibraltar, Roland and Alesis plates all have the same size, but will not fit your Nord drum or pad.. I never came across one from another brand that does fit, I'd check the local metalworkers shop, smith (or whatever they are called), they should be able to replicate it, it's just a plate with 4 holes welded on a tube I'd say..
Last edited by wartaler on 06 Sep 2019, 14:43, edited 3 times in total.
- These users thanked the author wartaler for the post:
- pablomastodon
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular
-
- Posts: 7
- Joined: 17 Sep 2019, 00:22
- 5
- Your Nord Gear #1: Nord Drum
- Has thanked: 2 times
- Been thanked: 2 times
Re: ND Pad Replacement Mount
Good Morning,
I recently purchased a used ND1 which did not come with a mounting plate. I was looking a replacement online and found one at the link below. On the product page there is a downloadable spec sheet with the product dimensions so you can see if it will fit your device.
https://pintech.com/product/pintech-metal-module-mount/
Thank you,
DavevaD
I recently purchased a used ND1 which did not come with a mounting plate. I was looking a replacement online and found one at the link below. On the product page there is a downloadable spec sheet with the product dimensions so you can see if it will fit your device.
https://pintech.com/product/pintech-metal-module-mount/
Thank you,
DavevaD
-
- Moderator
- Posts: 772
- Joined: 19 Mar 2009, 18:32
- 16
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
- Has thanked: 88 times
- Been thanked: 225 times
Re: ND Pad Replacement Mount
Hi Dave,
That plate looks great! However, I checked the specifications and it is larger than the original mounting plate, the holes are too far apart, but perhaps you can drill new holes in it so that it fits the Nord drum, keep us posted..
Cheers,
Albert
That plate looks great! However, I checked the specifications and it is larger than the original mounting plate, the holes are too far apart, but perhaps you can drill new holes in it so that it fits the Nord drum, keep us posted..
Cheers,
Albert
Last edited by wartaler on 25 Sep 2019, 08:30, edited 4 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular