Any ideas about where to get a METAL replacement for the plastic NordPad Mount? The screw holes in the Gibraltar and Roland ones don't line up.
Cheers
T14
4 posts
• Page 1 of 1
- Teknik14
- Posts: 2
- Joined: 28 Mar 2015, 20:38
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Drum 2
- Your Nord Gear #2: Nord Drum
Re: ND Pad Replacement Mount
Yes, the ‘universal’ Gibraltar, Roland and Alesis plates all have the same size, but will not fit your Nord drum or pad.. I never came across one from another brand that does fit, I'd check the local metalworkers shop, smith (or whatever they are called), they should be able to replicate it, it's just a plate with 4 holes welded on a tube I'd say..
Last edited by wartaler on 06 Sep 2019, 14:43, edited 3 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular
- The author wartaler was thanked by:
- pablomastodon
- wartaler
- Moderator
- Posts: 737
- Joined: 19 Mar 2009, 18:32
- Country:
- Has thanked: 92 times
- Been thanked: 231 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
Re: ND Pad Replacement Mount
Good Morning,
I recently purchased a used ND1 which did not come with a mounting plate. I was looking a replacement online and found one at the link below. On the product page there is a downloadable spec sheet with the product dimensions so you can see if it will fit your device.
https://pintech.com/product/pintech-metal-module-mount/
Thank you,
DavevaD
I recently purchased a used ND1 which did not come with a mounting plate. I was looking a replacement online and found one at the link below. On the product page there is a downloadable spec sheet with the product dimensions so you can see if it will fit your device.
https://pintech.com/product/pintech-metal-module-mount/
Thank you,
DavevaD
- DavevaD
- Posts: 7
- Joined: 17 Sep 2019, 00:22
- Country:
- Has thanked: 2 times
- Been thanked: 2 times
- Your Nord Gear #1: Nord Drum
Re: ND Pad Replacement Mount
Hi Dave,
That plate looks great! However, I checked the specifications and it is larger than the original mounting plate, the holes are too far apart, but perhaps you can drill new holes in it so that it fits the Nord drum, keep us posted..
Cheers,
Albert
That plate looks great! However, I checked the specifications and it is larger than the original mounting plate, the holes are too far apart, but perhaps you can drill new holes in it so that it fits the Nord drum, keep us posted..
Cheers,
Albert
Last edited by wartaler on 25 Sep 2019, 08:30, edited 4 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular
- wartaler
- Moderator
- Posts: 737
- Joined: 19 Mar 2009, 18:32
- Country:
- Has thanked: 92 times
- Been thanked: 231 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 15 guests