Does anyone know, whether it is possible, to send only the transpose-command via midi to a second board and no other command?
Thanks!
10 posts
• Page 1 of 1
Re: Sending only transpose via Midi
Bonjour
OuI il ya les CC 52 et 53, mais je ne sais pas comment ca marche
est ce que quelqu un peu me l'expliquer
Merci
Jean
OuI il ya les CC 52 et 53, mais je ne sais pas comment ca marche
est ce que quelqu un peu me l'expliquer
Merci
Jean
- electrojean
- Posts: 5
- Joined: 26 Aug 2019, 17:23
- Location: VAR FRANCE
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Sending only transpose via Midi
electrojean wrote:Bonjour
OuI il ya les CC 52 et 53, mais je ne sais pas comment ca marche
est ce que quelqu un peu me l'expliquer
Merci
Jean
Hello, this forum is in English only, please (s'il vous plait).
As already explained, there are no standard (cross model/brand) MIDI CCs for that, even if some keyboards may have custom implementations (like NE5 does with "Transpose Enable" = CC52 and "Transpose Value" = CC53). The question of this thread was how to "send" those messages only to other boards and in general this is not possible.
Last edited by maxpiano on 19 Sep 2019, 15:09, edited 3 times in total.
-
maxpiano - Patch Creator
- Posts: 6188
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 441 times
- Been thanked: 2178 times
- Your Nord Gear #1: Nord Stage 3
Re: Sending only transpose via Midi
1000 excuses SORRY
Jean
Jean
- The author electrojean was thanked by:
- Piparegard
- electrojean
- Posts: 5
- Joined: 26 Aug 2019, 17:23
- Location: VAR FRANCE
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Sending only transpose via Midi
i try in inglish!!!
To send CC 52(select transpose) and 53 (value) Message i have "Mobilesheet" aplli on android and Windows who is an MIDI editor, but i don't understant where are the values who produce the half semi tone : -1 2 3 4 5 6 and + 1 2 3 4 5 6
Thank you
Jean!
To send CC 52(select transpose) and 53 (value) Message i have "Mobilesheet" aplli on android and Windows who is an MIDI editor, but i don't understant where are the values who produce the half semi tone : -1 2 3 4 5 6 and + 1 2 3 4 5 6
Thank you
Jean!
- electrojean
- Posts: 5
- Joined: 26 Aug 2019, 17:23
- Location: VAR FRANCE
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Sending only transpose via Midi
Maybe i make a mistake for my demand
I want receive midi message (CC52 and CC53) from a MDI editor on my ELECTRO 5 to have automatic transposition
Sorry for my english
Jean
I want receive midi message (CC52 and CC53) from a MDI editor on my ELECTRO 5 to have automatic transposition
Sorry for my english
Jean
- electrojean
- Posts: 5
- Joined: 26 Aug 2019, 17:23
- Location: VAR FRANCE
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Sending only transpose via Midi
No problem Jean, the easiest way is to use a MIDI Monitor app to see which values are being sent by NE when switching the Transpose on/off and changing its value.
On a PC you can use MidiOx, on iPad there is MidiWrench, on Mac there is "MIDI Monitor" (just Google for the one applicable for you)
Otherwise just try a few values and see what happens
PS: check also that NE5 has MIDI "Control Change Mode" set to Send/Receive in its MIDI options.
On a PC you can use MidiOx, on iPad there is MidiWrench, on Mac there is "MIDI Monitor" (just Google for the one applicable for you)
Otherwise just try a few values and see what happens
PS: check also that NE5 has MIDI "Control Change Mode" set to Send/Receive in its MIDI options.
Last edited by maxpiano on 19 Sep 2019, 15:12, edited 6 times in total.
-
maxpiano - Patch Creator
- Posts: 6188
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 441 times
- Been thanked: 2178 times
- Your Nord Gear #1: Nord Stage 3
Re: Sending only transpose via Midi
Most instrument makers will usually spread their parameter values evenly across the 0-127 range. So, for example, sustain pedal on/off via midi will be 0-63 = off, 64-127 will be on.
The Nord transpose range is -6 to +6 for a total of 13 different values. Divide 127 by 13 to get 9.8, roughly 10. The actual parameter value change points will vary slightly to accommodate for the fractional result, but if you choose to use values which all end in "4" or "5" you should be able to safely predict the instrument's response.
That is:
MIDI VALUE TRANSPOSE AMOUNT
4 -6
14 -5
24 -4
34 -3
etc.
The Nord transpose range is -6 to +6 for a total of 13 different values. Divide 127 by 13 to get 9.8, roughly 10. The actual parameter value change points will vary slightly to accommodate for the fractional result, but if you choose to use values which all end in "4" or "5" you should be able to safely predict the instrument's response.
That is:
MIDI VALUE TRANSPOSE AMOUNT
4 -6
14 -5
24 -4
34 -3
etc.
Last edited by pablomastodon on 20 Sep 2019, 16:52, edited 1 time in total.
bun fyah weh fyah fi bun
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
- electrojean
- Posts: 5
- Joined: 26 Aug 2019, 17:23
- Location: VAR FRANCE
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 30 guests