Nord User Forum

Instrument model: Nord Electro 3
Instrument OS version: OS v 3.14

Hello
I am new in this forum
Thank to help me if you can

I bought a used nord electro 3 this week .
All is OK but I have a problem with the rotor fonction .
The slow fast button operate.
The Rotor pedal do not operate with any switch pedal.
The sustain pedal is ok, but in the « rt » configuration the rotor does
not perform,
I have done a OS update .
I have done a Nord Factory restore
Thank you to help me ,because I don’t knows how to sold this problem .
Éric

It sounds like you are trying to use 1 pedal for both the sustain and rotor trigger, yes?
Does the pedal change the rotor speed at all? If it changes to fast, but then switches back to slow, you might need to change the ROTOR PEDAL MODE from "Hold" to "Toggle".
I would try the pedal in the rotor jack separately, and make sure that all of the settings are correct.

Thank
All the settings ares correct,the rotor pédal do not operet on all configurations
Il is the same ni rotor jack ...

Probably not broken, just a bit of a learning curve.
1. Ensure the rotary speed changes when you use the button on the keyboard, no pedal connected.
2. Ensure the pedal you are using has only two connectors and is not a "stereo" three conductor plug.
3. If your sustain pedal is working for sustain, plug it into the rotary plug. It should switch the rotary speeds.

twofarmers wrote:Probably not broken, just a bit of a learning curve.
1. Ensure the rotary speed changes when you use the button on the keyboard, no pedal connected.
2. Ensure the pedal you are using has only two connectors and is not a "stereo" three conductor plug.
3. If your sustain pedal is working for sustain, plug it into the rotary plug. It should switch the rotary speeds.

Le rno wrote:Thank
All the settings ares correct,the rotor pédal do not operet on all configurations
Il is the same ni rotor jack ...

I solved the problème :
I have open the keyboard
I soldered à câble in place of the rotor button card and add a new femelle jack making a hole near the others pédales emplacements .
I think it was a problème off Electric wire in the braid tress junction ......
Thanks for you help
Éric