Hello, i Write here to know if someone of you ever had a similar issue on the nord wave:
While i am playing a performance (but even When i dont and the keyboard is on) the display shows that the release parameters are changing independently without me interacting with the keyboard. I guess it is a physical issue of the machine. I really hope that someone of you can help. Thanks Sarà
release chances parameters indipenently
-
bumblebee_sara
- Posts: 3
- Joined: 13 Dec 2013, 17:12
- 10
- Your Nord Gear #1: Nord Wave
- Has thanked: 2 times
-
Eumel
- Patch Creator
- Posts: 327
- Joined: 31 Jul 2014, 16:16
- 9
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Electro 6
- Location: Straubing
- Has thanked: 286 times
- Been thanked: 162 times
Re: release chances parameters indipenently
Hi Sara,
Are those different parameters that are changing or is it always the same parameter? If it is always the same, then it is likely that a poti or a knob needs to be cleaned or exchanged. Should be no big thing.
Greets
Eumel
Are those different parameters that are changing or is it always the same parameter? If it is always the same, then it is likely that a poti or a knob needs to be cleaned or exchanged. Should be no big thing.
Greets
Eumel
Nord Stage 4 88
Nord Electro 6 compact
Nord Electro 6 compact
-
Eumel
- Patch Creator
- Posts: 327
- Joined: 31 Jul 2014, 16:16
- 9
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Electro 6
- Location: Straubing
- Has thanked: 286 times
- Been thanked: 162 times
Re: release chances parameters indipenently
Hi Sara,
If it is always the same release parameter that changes without touching it, then it is likely that this poti needs to be cleaned or exchanged. Should be no big thing. You can probably provoke the failure be giving the keyboards gentle hits with the hand somewhere.
Greets
Eumel
If it is always the same release parameter that changes without touching it, then it is likely that this poti needs to be cleaned or exchanged. Should be no big thing. You can probably provoke the failure be giving the keyboards gentle hits with the hand somewhere.
Greets
Eumel
- These users thanked the author Eumel for the post:
- bumblebee_sara
Nord Stage 4 88
Nord Electro 6 compact
Nord Electro 6 compact
-
bumblebee_sara
- Posts: 3
- Joined: 13 Dec 2013, 17:12
- 10
- Your Nord Gear #1: Nord Wave
- Has thanked: 2 times
Re: release chances parameters indipenently
Hello Eumel, i can read in the display the release parameter changing from 68ms to 80ms, just to make an example, and so on. it continues sometime for a couple of times.Eumel wrote:Hi Sara,
If it is always the same release parameter that changes without touching it, then it is likely that this poti needs to be cleaned or exchanged. Should be no big thing. You can probably provoke the failure be giving the keyboards gentle hits with the hand somewhere.
Greets
Eumel
Always different parameters. It could be, provoking it with a little hit but this happens even when the keyboard is on but no one is touching it or playing it.
Thanks you very Much for these infotmation, Sara
-
maxpiano
- Patch Creator
- Posts: 6301
- Joined: 27 Jun 2011, 13:29
- 12
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 451 times
- Been thanked: 2209 times
Re: release chances parameters indipenently
HI Sara, as Eumel says it is probably a faulty potentiometer (the Release one) that needs cleaning or replacing (if you cannot do this yourself you should contact the official service, via see eko Music Group website)
As a temporary workaround, if you don't need to change it while playing then put it to 0 (full left) before turning the NW on and leave it there.
As a temporary workaround, if you don't need to change it while playing then put it to 0 (full left) before turning the NW on and leave it there.
- These users thanked the author maxpiano for the post:
- bumblebee_sara
-
bumblebee_sara
- Posts: 3
- Joined: 13 Dec 2013, 17:12
- 10
- Your Nord Gear #1: Nord Wave
- Has thanked: 2 times
Re: release chances parameters indipenently
maxpiano wrote:HI Sara, as Eumel says it is probably a faulty potentiometer (the Release one) that needs cleaning or replacing (if you cannot do this yourself you should contact the official service, via see eko Music Group website)
As a temporary workaround, if you don't need to change it while playing then put it to 0 (full left) before turning the NW on and leave it there.
It works!
thank you very much for this advice, it saves my life and my next gig
Sara