5 posts
• Page 1 of 1
Dirty bass A1 patch?
Anyone have any newb tips for programming a dirty bass patch for the A1? Mine always end up sounding a little thin.
- djnafai
- Posts: 8
- Joined: 11 Dec 2015, 17:43
- Country:
- Has thanked: 2 times
- Been thanked: 2 times
- Your Nord Gear #1: Nord Lead A1
Re: Dirty bass A1 patch?
Try a square wave mixed with a sine sub, and the ladder filter with middle resonance and low cut off (75 to 120 Hz). Maybee some drice on the filter. And a very fast LFO on the mix of the 2 OSC (or on the filter freq).
Actual synth: Nord Modular G2 - Nord Stage 3 73 - Virus Ti2 - Peak - Prophet 6
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...
-
alcools - Posts: 210
- Joined: 06 May 2011, 18:12
- Location: Paris
- Country:
- Has thanked: 9 times
- Been thanked: 39 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Modular
Re: Dirty bass A1 patch?
There is an interesting trick I recently learned and which works well on my Prophet rev2, would be curious how this works for A1 (I am not at it now to test it):
In one of the slots, take a sawtooth and use the hi-pass filter with no or slight (experiment with that) key-tracking, cut-off freq all the way to the left and turn up resonance. This resonance will now boost the lower edge of the frequency range.
In one of the slots, take a sawtooth and use the hi-pass filter with no or slight (experiment with that) key-tracking, cut-off freq all the way to the left and turn up resonance. This resonance will now boost the lower edge of the frequency range.
- skipgilles
- Patch Creator
- Posts: 91
- Joined: 23 Feb 2011, 17:13
- Location: Switzerland
- Country:
- Has thanked: 15 times
- Been thanked: 29 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord Lead A1
5 posts
• Page 1 of 1
Return to Nord Lead / Rack Forum
Who is online
Users browsing this forum: No registered users and 16 guests