It's all about clutter down there.I need to know where things are so velcro is my friend.
After two months I'm pleased to report the Radial dials don't move unless I get tactile with them! Great investment in my sound.
Power bar underneath is too busy so I reach out to anyone with experience in dedicated multi outlet power supplies.
I hope this is a good choice.I'm new at USB powered things around my stage gear too,still use no soft synths,no laptop.
I did enough preliminary homework to spring for the closest to my needs I could find. Caline P1
Afraid I may have fallen one outlet short? It has only one of each 12V,15V,18V.....I need two @ 12V DC.Can they share the 1000ma?
Would hate to limit the 'moog' because of current!This unit seems robust in it's current side of things,and might be 'self limiting'
in which case I'm in the clear to try the 18V outlet on the 15V 'mixer'?
Might just be that 'all added up' the current draw will be reasonable for all four devices?
I need 12V DC @ 250ma for the Neo Ventilator
12V DC @ 1000ma for a Behringer Model D
15V DC @ 260ma for a Radial Key Largo mixer
9V DC @100ma for a Boss RE-20
Closest I could find is the Caline P1 which has 9,12,15,18 Volt DC outlets.
If I'm one short because of incorrect voltages I'd hate to make a costly mistake.
18V is 20% higher than 15V.Guess I better ask Radial first before I attach the Key Largo to 18V DC?
Made some shelves for the C2D and Stage88.....1/4" dowel and 13 ply fir.Moog sits about right?
Thank you MacGuyver! I have a Hammond M3 music rack to build the same in the making, for the 88.
Repurposed and beautiful,and inexpensive.Able to hold a lot of music......building LED lighting in as well.
Some of those pedal DC outlets might power LED lights without introducing noise?
Thanks in advance for your replies!
14 posts
• Page 1 of 2 • 1, 2
Power Supply for FX 'pedalboard'
- Attachments
-
- !cid_1287.jpg (72.78 KiB) Viewed 2547 times
-
- !cid_1334.jpg (150.29 KiB) Viewed 2547 times
-
- !cid_1299.jpg (122.06 KiB) Viewed 2547 times
NS3C NS2EX88 C2D Yamaha MOX8 Behringer Model D (5) Behringer Neutron (5) Roland Lucina AX9 12 Hammonds/Leslies.(BV/BCV/B2/3 A100's/M3/M102 etc.
- LeftyBass68
- Posts: 289
- Joined: 10 Jul 2018, 03:58
- Location: Vancouver
- Country:
- Has thanked: 64 times
- Been thanked: 68 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Stage 3
Re: Power Supply for FX 'pedalboard'
Hi,
What keyboard stand you‘re using here. Looks interesting.
Thanks and greets,
Eumel
What keyboard stand you‘re using here. Looks interesting.
Thanks and greets,
Eumel
Nord Stage 4 88
Nord Electro 6 compact
Nord Electro 6 compact
-
Eumel - Patch Creator
- Posts: 322
- Joined: 31 Jul 2014, 16:16
- Location: Straubing
- Country:
- Has thanked: 286 times
- Been thanked: 161 times
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Electro 6
Re: Power Supply for FX 'pedalboard'
Thanks,
It's a Hercules K410B stand.
The pedalboard is Ikea Gorm homemade.
Saves me hours of setup/striking with wiring on a snake.
The Ventilator is routed to outputs 3 on both Stages.
Output 4 on the Stage IIEX is a synth (mainly bass).
Love sharing the pianos between them.
Soloing synth mainly the compact....
It's a Hercules K410B stand.
The pedalboard is Ikea Gorm homemade.
Saves me hours of setup/striking with wiring on a snake.
The Ventilator is routed to outputs 3 on both Stages.
Output 4 on the Stage IIEX is a synth (mainly bass).
Love sharing the pianos between them.
Soloing synth mainly the compact....
- Attachments
-
- !cid_1336.jpg (121.8 KiB) Viewed 2523 times
NS3C NS2EX88 C2D Yamaha MOX8 Behringer Model D (5) Behringer Neutron (5) Roland Lucina AX9 12 Hammonds/Leslies.(BV/BCV/B2/3 A100's/M3/M102 etc.
- The author LeftyBass68 was thanked by 2 members, including:
- Eumel • Berretje
- LeftyBass68
- Posts: 289
- Joined: 10 Jul 2018, 03:58
- Location: Vancouver
- Country:
- Has thanked: 64 times
- Been thanked: 68 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Stage 3
Re: Power Supply for FX 'pedalboard'
I don't have a pedalboard for my synths, even if I have few of them. For the NL2X, I have 4 TC pedals that are all 9V so I daisy chain them with a One Spot power, no noise....
I have IKEA LEDs to get lights on all my keys and no noise but they are plugged into AC directly....
On my P08, there is the H9 Eventide, the power is also plugged into Ac directly....
BUT:
I have my guitar pedalboard, 20 pedals, all powered by the DC10 Ciosk, awesome power. Adaptable between 9V, 15V, 18V, no noise....on my bass pedalboard, I have a bit of him because I daisy chained 9 pedals, haven't spent yet for another DC10 (220 CAN$?).... But all my Radial pedals, like the Radail Bassbone Bass Preamp to the JDX DI etc, I use their power...
I also use the same One Spot to power the two Ocean Beach Drawbars in my C2....
So, not very practical because a lots of different plugs and stuff but works well for me.
I have IKEA LEDs to get lights on all my keys and no noise but they are plugged into AC directly....
On my P08, there is the H9 Eventide, the power is also plugged into Ac directly....
BUT:
I have my guitar pedalboard, 20 pedals, all powered by the DC10 Ciosk, awesome power. Adaptable between 9V, 15V, 18V, no noise....on my bass pedalboard, I have a bit of him because I daisy chained 9 pedals, haven't spent yet for another DC10 (220 CAN$?).... But all my Radial pedals, like the Radail Bassbone Bass Preamp to the JDX DI etc, I use their power...
I also use the same One Spot to power the two Ocean Beach Drawbars in my C2....
So, not very practical because a lots of different plugs and stuff but works well for me.
Stage 2/C2/NL2X+TC Pedals, 2XMatrix, EMU P2K, TX802, DSI P8/Tetra+H9, P12+TC HoF, D50+PG1000, XV5080,AX keytar, Streichfett, Drumbrute.Ibanez SR1200 & 2605 basses, Artstar AS153,G&L L2000,Legacy HSS,Asat Blueboys,Asat Deluxe Savanna.genelec 8040A.
-
Quai34 - Posts: 1874
- Joined: 01 Jan 2012, 23:02
- Location: CANADA WINNIPEG
- Country:
- Has thanked: 114 times
- Been thanked: 305 times
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Lead 1/2/2x
Re: Power Supply for FX 'pedalboard'
By the way, Radial customer service is awesome, send an email, they we I'll reply quite fast and their advices are always great and spot on so, if they could have their Key Largo using 18V instead of 15V, they will tell you....
Stage 2/C2/NL2X+TC Pedals, 2XMatrix, EMU P2K, TX802, DSI P8/Tetra+H9, P12+TC HoF, D50+PG1000, XV5080,AX keytar, Streichfett, Drumbrute.Ibanez SR1200 & 2605 basses, Artstar AS153,G&L L2000,Legacy HSS,Asat Blueboys,Asat Deluxe Savanna.genelec 8040A.
-
Quai34 - Posts: 1874
- Joined: 01 Jan 2012, 23:02
- Location: CANADA WINNIPEG
- Country:
- Has thanked: 114 times
- Been thanked: 305 times
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Lead 1/2/2x
Re: Power Supply for FX 'pedalboard'
While on the subject, that KEY LARGO is an AWESOME little mixer!
bless, pablo
bless, pablo
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by:
- Berretje
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: Power Supply for FX 'pedalboard'
Hope I'm not pointing out the obvious, but I think the KL and the Vent have centre positive power supplies (like normal devices), but the Boss, coming from guitar world, probably has centre negative. So you need to make sure the 9V for the Boss is centre negative, and isolated from any centre positive 9V devices.
When I look at the Caline P1 pics, it's a centre negative power supply, designed for guitar hardware, and I guess the 9V supplies are not isolated from each other. But the other, switchable supplies are isolated. So my thinking is you would need to include a polarity change between the Caline outputs and any centre positive gear.
(Edit: Maybe that's what the red cables are in the Caline pics)
When I look at the Caline P1 pics, it's a centre negative power supply, designed for guitar hardware, and I guess the 9V supplies are not isolated from each other. But the other, switchable supplies are isolated. So my thinking is you would need to include a polarity change between the Caline outputs and any centre positive gear.
(Edit: Maybe that's what the red cables are in the Caline pics)
- Attachments
-
- Caline.JPG (13.01 KiB) Viewed 2237 times
Last edited by CountFosco on 30 Nov 2018, 15:09, edited 2 times in total.
-
CountFosco - Posts: 682
- Joined: 16 Nov 2016, 11:23
- Country:
- Has thanked: 152 times
- Been thanked: 259 times
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Nord Lead A1
-
CountFosco - Posts: 682
- Joined: 16 Nov 2016, 11:23
- Country:
- Has thanked: 152 times
- Been thanked: 259 times
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Nord Lead A1
Re: Power Supply for FX 'pedalboard'
Count Fosco makes a good point. This issue is common to guitar players-Fuzz pedals and others are often center positive and most pedal power supplies (Boss etc) are center negative. Make sure you check this before you fry your gear. You need a center negative to center positive adapter similar to this: https://www.ebay.com/itm/New-Voodoo-Lab ... SwwE5WZvwv
Last edited by JayDee on 30 Nov 2018, 19:23, edited 1 time in total.
- JayDee
- Posts: 318
- Joined: 19 Dec 2017, 05:45
- Location: Northern California
- Country:
- Has thanked: 106 times
- Been thanked: 114 times
- Your Nord Gear #1: Nord Electro 5
Re: Power Supply for FX 'pedalboard'
Eventide have a super handy power supply that does switchable 9/12/15/18V on each of 7 outputs and runs on world voltage. It's made custom for them by CIOKS and is built like a tank. I'm seriously considering one myself to run a few small synths (Micromonsta, etc.) plus my two H9s and a couple other bits and bobs. They use standard plugs (I think RCA style) to send power and you can get centre negative or centre positive cables for them (or make your own if you can solder a little bit). High power too - 4.5W PER OUTPUT which is really great.
- 23skidoo
- Posts: 504
- Joined: 27 Nov 2018, 18:58
- Country:
- Has thanked: 59 times
- Been thanked: 189 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Lead 3
14 posts
• Page 1 of 2 • 1, 2
Return to Accessories and Amplification
Who is online
Users browsing this forum: No registered users and 7 guests