I just purchased a Nord Stage 3, so taking a little time to post some more programs from my Stage 2 EX that you might have fun with. Note that most of my programs use the control pedal morph even if only to bring instruments in and out of a mix, and the global vibrato speed needs to set for the type of playing as well.
Pure Prairie League's "Two Lane Highway" with Wurlitzer and Pedal Steel. The MP3 is a live version with our other keyboard player on Rhodes and then me coming in on the pedal steel:
Sorry I don't have a MP3 for this one that has Banjo left of the split and Pedal Steel on the right. This program uses wave 54 for the pedal steel sound, but you can also try piano, guitar, and clavinet samples depending upon the sound you're looking for.
I'll revise this post as needed based on questions, so feel free to comment. Take care.
LINK "Stage 2 - For Those New To Programming" --> nord-stage-2-programs-ns2p-ns2pb-files-f15/stage-2-for-those-new-to-programming-t16863.html
Forum rules
How to get the MP3-Player:
Upload a MP3 file where you play some notes using your sample.
Click the "PLACE INLINE" button after uploading the MP3 sample in order to automatically create a Flash MP3 player in your post!
Also check the Forum Rules, in particular rule #6 about the sharing of programs and samples.
How to get the MP3-Player:
Upload a MP3 file where you play some notes using your sample.
Click the "PLACE INLINE" button after uploading the MP3 sample in order to automatically create a Flash MP3 player in your post!
Also check the Forum Rules, in particular rule #6 about the sharing of programs and samples.
9 posts
• Page 1 of 1
Pedal Steel Patches - free to a good home
- Attachments
-
- TwoLaneHighway_W.mp3
- Live version of Nord Pedal Steel for Pure Prairie League's "Two Lane Highway"
- (729.14 KiB) Downloaded 2381 times
Last edited by WannitBBBad on 28 Dec 2018, 20:17, edited 2 times in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
- The author WannitBBBad was thanked by 2 members, including:
- Volkoff • pablomastodon
-
WannitBBBad - Patch Creator
- Posts: 1807
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1048 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
Re: Pedal Steel Patches - free to a good home
WannitBBBad...I seriously would love a good pedal steel like this one for my Nord Stage 3. Have you been able to create a new one and if so could you post please?
Re: Pedal Steel Patches - free to a good home
Hello, I have those and quite a few other programs posted for the Stage 3 at nord-stage-3-programs-ns3p-ns3pb-files-f32/classic-rock-and-other-programs-set-3-t15745.html. Take care
Last edited by WannitBBBad on 16 Nov 2018, 05:59, edited 2 times in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
- The author WannitBBBad was thanked by:
- pablomastodon
-
WannitBBBad - Patch Creator
- Posts: 1807
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1048 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
Re: Pedal Steel Patches - free to a good home
Hello;
I can't find any info on the sample which is require for this program.
Any advice will be appreciated.
I can't find any info on the sample which is require for this program.
Any advice will be appreciated.
- peterb
- Posts: 7
- Joined: 07 Jul 2012, 12:59
- Country:
- Has thanked: 4 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Wave
- Your Nord Gear #2: Nord Stage 4
Re: Pedal Steel Patches - free to a good home
Hello, I'm fairly certain the sound you hear on the MP3 was created using the synth capability rather than a sample. It should play fine when you load it - I apologize if I'm mistaken. However, either in this program or another, I did have a slot set aside to switch to a pedal steel sample I found at post70948.html?hilit=Pedal%20steel#p70948. I ended up favoring the wavetable sound and was disappointed when wave #54 wasn't included on the Stage 3. Take care.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
-
WannitBBBad - Patch Creator
- Posts: 1807
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1048 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
Re: Pedal Steel Patches - free to a good home
Thanks for the prompt reply and the link to the other sample !!
- peterb
- Posts: 7
- Joined: 07 Jul 2012, 12:59
- Country:
- Has thanked: 4 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Wave
- Your Nord Gear #2: Nord Stage 4
Re: Pedal Steel Patches - free to a good home
WannitBBad..The steel samples sound extremely realistic and really nice playing too. I know you said you converted the files from your old Nord Stage 2 EX. I still have mine so my question is are you able to post a .nsmp file of the pedal steel for use in the NS2EX? Thanks in advance.
Stage 2 Ex, Nord C2, Electro 3, Yamaha C7, Vintage Vibe 73 piano, Crumar Mojo, Leslie 3300, Wurlitzer 200A, Rhodes 73 Suitcase, Clavinet D6, Hohner Pianet T, Vox Continental, Vox Super Continental, Gibson K-101, Yamaha YC25D organ
- The author Farfisameister was thanked by:
- WannitBBBad
- Farfisameister
- Posts: 32
- Joined: 01 Aug 2011, 22:02
- Has thanked: 7 times
- Been thanked: 13 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord C2
Re: Pedal Steel Patches - free to a good home
Farfisameister wrote:WannitBBad..The steel samples sound extremely realistic and really nice playing too. I know you said you converted the files from your old Nord Stage 2 EX. I still have mine so my question is are you able to post a .nsmp file of the pedal steel for use in the NS2EX? Thanks in advance.
Thank you. The .nsmp file by podmed can be found at post70948.html?hilit=Pedal%20steel#p70948, however I believe I just used the synth functionality with wave 54 for the programs. Take care.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
- The author WannitBBBad was thanked by:
- Farfisameister
-
WannitBBBad - Patch Creator
- Posts: 1807
- Joined: 25 Jul 2011, 03:36
- Country:
- Has thanked: 1048 times
- Been thanked: 1531 times
- Your Nord Gear #1: Nord Stage 3
Re: Pedal Steel Patches - free to a good home
Found it. Thanks so much for your help. I appreciate it!
Stage 2 Ex, Nord C2, Electro 3, Yamaha C7, Vintage Vibe 73 piano, Crumar Mojo, Leslie 3300, Wurlitzer 200A, Rhodes 73 Suitcase, Clavinet D6, Hohner Pianet T, Vox Continental, Vox Super Continental, Gibson K-101, Yamaha YC25D organ
- Farfisameister
- Posts: 32
- Joined: 01 Aug 2011, 22:02
- Has thanked: 7 times
- Been thanked: 13 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord C2
9 posts
• Page 1 of 1
Return to Nord Stage 2 Programs (*.ns2p files)
Who is online
Users browsing this forum: No registered users and 14 guests