Share your complete Nord Stage 2 programs/patches including sample sets (nsmp files) used, including mp3 previews.
Forum rules
How to get the MP3-Player:
Upload a MP3 file where you play some notes using your sample.
Click the "PLACE INLINE" button after uploading the MP3 sample in order to automatically create a Flash MP3 player in your post!
Also check the Forum Rules, in particular rule #6 about the sharing of programs and samples.

Pedal Steel Patches - free to a good home

Postby WannitBBBad » 08 Jul 2018, 16:24

I just purchased a Nord Stage 3, so taking a little time to post some more programs from my Stage 2 EX that you might have fun with. Note that most of my programs use the control pedal morph even if only to bring instruments in and out of a mix, and the global vibrato speed needs to set for the type of playing as well.

Pure Prairie League's "Two Lane Highway" with Wurlitzer and Pedal Steel. The MP3 is a live version with our other keyboard player on Rhodes and then me coming in on the pedal steel:
PPL 2 Lane Hwy W.ns2p
Pedal Steel and Wurlitzer piano for Pure Prairie League's "Two Lane Highway" by WannitBBBad
(547 Bytes) Downloaded 358 times

Sorry I don't have a MP3 for this one that has Banjo left of the split and Pedal Steel on the right. This program uses wave 54 for the pedal steel sound, but you can also try piano, guitar, and clavinet samples depending upon the sound you're looking for.
Pedal Steel W.ns2p
Banjo on the left and Pedal Steel on the right by WannitBBBad
(547 Bytes) Downloaded 358 times

I'll revise this post as needed based on questions, so feel free to comment. Take care.

LINK "Stage 2 - For Those New To Programming" --> nord-stage-2-programs-ns2p-ns2pb-files-f15/stage-2-for-those-new-to-programming-t16863.html
Attachments
TwoLaneHighway_W.mp3
Live version of Nord Pedal Steel for Pure Prairie League's "Two Lane Highway"
(729.14 KiB) Downloaded 2354 times
Last edited by WannitBBBad on 28 Dec 2018, 20:17, edited 2 times in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...

The author WannitBBBad was thanked by 2 members, including:
Volkoffpablomastodon
User avatar
WannitBBBad
Patch Creator
 
Posts: 1795
Joined: 25 Jul 2011, 03:36
Country: United States of America
Has thanked: 1039 times
Been thanked: 1527 times
Your Nord Gear #1: Nord Stage 3

Pedal Steel Patches - free to a good home


Sponsor
 

Re: Pedal Steel Patches - free to a good home

Postby bwood150 » 13 Nov 2018, 08:48

WannitBBBad...I seriously would love a good pedal steel like this one for my Nord Stage 3. Have you been able to create a new one and if so could you post please?
bwood150
 
Posts: 1
Joined: 26 Feb 2018, 04:12
Country: United States of America
Has thanked: 1 time
Been thanked: 0 time

Re: Pedal Steel Patches - free to a good home

Postby WannitBBBad » 16 Nov 2018, 05:57

Hello, I have those and quite a few other programs posted for the Stage 3 at nord-stage-3-programs-ns3p-ns3pb-files-f32/classic-rock-and-other-programs-set-3-t15745.html. Take care
Last edited by WannitBBBad on 16 Nov 2018, 05:59, edited 2 times in total.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...

The author WannitBBBad was thanked by:
pablomastodon
User avatar
WannitBBBad
Patch Creator
 
Posts: 1795
Joined: 25 Jul 2011, 03:36
Country: United States of America
Has thanked: 1039 times
Been thanked: 1527 times
Your Nord Gear #1: Nord Stage 3

Re: Pedal Steel Patches - free to a good home

Postby peterb » 20 Jan 2019, 18:46

Hello;

I can't find any info on the sample which is require for this program.
Any advice will be appreciated.
peterb
 
Posts: 7
Joined: 07 Jul 2012, 12:59
Country: Canada
Has thanked: 4 times
Been thanked: 0 time
Your Nord Gear #1: Nord Wave
Your Nord Gear #2: Nord Stage 4

Re: Pedal Steel Patches - free to a good home

Postby WannitBBBad » 20 Jan 2019, 23:52

Hello, I'm fairly certain the sound you hear on the MP3 was created using the synth capability rather than a sample. It should play fine when you load it - I apologize if I'm mistaken. However, either in this program or another, I did have a slot set aside to switch to a pedal steel sample I found at post70948.html?hilit=Pedal%20steel#p70948. I ended up favoring the wavetable sound and was disappointed when wave #54 wasn't included on the Stage 3. Take care.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...
User avatar
WannitBBBad
Patch Creator
 
Posts: 1795
Joined: 25 Jul 2011, 03:36
Country: United States of America
Has thanked: 1039 times
Been thanked: 1527 times
Your Nord Gear #1: Nord Stage 3

Re: Pedal Steel Patches - free to a good home

Postby peterb » 26 Jan 2019, 14:33

Thanks for the prompt reply and the link to the other sample !!
peterb
 
Posts: 7
Joined: 07 Jul 2012, 12:59
Country: Canada
Has thanked: 4 times
Been thanked: 0 time
Your Nord Gear #1: Nord Wave
Your Nord Gear #2: Nord Stage 4

Re: Pedal Steel Patches - free to a good home

Postby Farfisameister » 25 Feb 2019, 00:36

WannitBBad..The steel samples sound extremely realistic and really nice playing too. I know you said you converted the files from your old Nord Stage 2 EX. I still have mine so my question is are you able to post a .nsmp file of the pedal steel for use in the NS2EX? Thanks in advance.
Stage 2 Ex, Nord C2, Electro 3, Yamaha C7, Vintage Vibe 73 piano, Crumar Mojo, Leslie 3300, Wurlitzer 200A, Rhodes 73 Suitcase, Clavinet D6, Hohner Pianet T, Vox Continental, Vox Super Continental, Gibson K-101, Yamaha YC25D organ

The author Farfisameister was thanked by:
WannitBBBad
Farfisameister
 
Posts: 32
Joined: 01 Aug 2011, 22:02
Has thanked: 7 times
Been thanked: 13 times
Your Nord Gear #1: Nord Stage 2 EX
Your Nord Gear #2: Nord C2

Re: Pedal Steel Patches - free to a good home

Postby WannitBBBad » 25 Feb 2019, 20:21

Farfisameister wrote:WannitBBad..The steel samples sound extremely realistic and really nice playing too. I know you said you converted the files from your old Nord Stage 2 EX. I still have mine so my question is are you able to post a .nsmp file of the pedal steel for use in the NS2EX? Thanks in advance.

Thank you. The .nsmp file by podmed can be found at post70948.html?hilit=Pedal%20steel#p70948, however I believe I just used the synth functionality with wave 54 for the programs. Take care.
Nord Stage 3 | SC Prophet T8 | Korg X50... In the past: Nord Stage EX, 2, 2EX | SC Prophet 5, 10 | MiniMoog | Hammond B3 & 122 Leslie | Yamaha DX7IIFD, EX5, CP60 | Hohner D6 | Fender Rhodes | Roland S-50, D-50, XP-50...

The author WannitBBBad was thanked by:
Farfisameister
User avatar
WannitBBBad
Patch Creator
 
Posts: 1795
Joined: 25 Jul 2011, 03:36
Country: United States of America
Has thanked: 1039 times
Been thanked: 1527 times
Your Nord Gear #1: Nord Stage 3

Re: Pedal Steel Patches - free to a good home

Postby Farfisameister » 25 Feb 2019, 22:11

Found it. Thanks so much for your help. I appreciate it!
Stage 2 Ex, Nord C2, Electro 3, Yamaha C7, Vintage Vibe 73 piano, Crumar Mojo, Leslie 3300, Wurlitzer 200A, Rhodes 73 Suitcase, Clavinet D6, Hohner Pianet T, Vox Continental, Vox Super Continental, Gibson K-101, Yamaha YC25D organ
Farfisameister
 
Posts: 32
Joined: 01 Aug 2011, 22:02
Has thanked: 7 times
Been thanked: 13 times
Your Nord Gear #1: Nord Stage 2 EX
Your Nord Gear #2: Nord C2


Return to Nord Stage 2 Programs (*.ns2p files)



Who is online

Users browsing this forum: No registered users and 12 guests