Red Moon wrote:So, is there any modification that you guys can think up to turn a single pedal into one capable of Nord Triple Pedal-style half-pedaling/pedal noise?
How hard would it be to mod one of them into that? Additionally, does the sustain part of the Nord TP work for any other keyboard? (I.e., if any mod was done, does that make it a dedicated pedal for Nord now?)
@Red Moon,
It could be done, but it all depends on how much your time is valued at.
As far as I know this type of mod would only be functional with the Nord Stage 2 and Nord Piano.
To all,
I've been watching this thread with great interest, thanks for breaking down the mystery of the NTP for us.
The Sustain pedal appears to be velocity sensitive as well, with early, and late making contacts (probably for the stomp feature).
I think a couple of the interpretations of the 4 digit SMD resistor values are incorrect.
I have:
R1= 2K (2001)
R2=4.7K (4701)
R3=10.2K (1022)
R4=820 (8200)
R5=10K (1002)
R6=5.6K (5601)
I believe that the NTP could develop issues related to the membrane switches fouling due to debris.
If the keyboards can get this, just think of how prevalent it would be in a device that normally sets on the ground (well, at least it would be easier to correct).
My schematic is almost complete, I'm just missing the contact wiring under the right pedal contacts (but that could be worked out in the breadboard stage).
Now, If I only had an NS2
Merry Christmas, Hanon
)
