The Nord C1, C2 and C2D Organ Forum

Homemade half moon switch

Postby bboyjamin » 12 Dec 2012, 02:30

Hi all, first post!

I just ordered a C2. But I refuse to pay the ridiculous price of the half moon switch. I want to make one with a wood body and a 3-way lever switch from a telecaster or something.

I'm wondering if someone can give me details. Is it really just a switch, or something more, like variable resistance?

I'm guessing it's like:

slow setting: tip grounded to sleeve
off setting: nothing connected to sleeve
fast setting: ring connected to sleeve.

Would someone who a half moon switch for the c2 feel like putting their multimeter on it, and get back to me?

Thanks, and if I do get some help here, I'll post a how to.

The author bboyjamin was thanked by:
rb4u1
bboyjamin
 
Posts: 23
Joined: 12 Dec 2012, 02:15
Country: Canada
Has thanked: 2 times
Been thanked: 8 times

Homemade half moon switch


Sponsor
 

Re: Homemade half moon switch

Postby mjbrands » 12 Dec 2012, 19:08

mjbrands
 

Re: Homemade half moon switch

Postby Mooser » 14 Dec 2012, 22:24

"Would someone who a half moon switch for the c2 feel like putting their multimeter on it, and get back to me?"

The late model "Leslie Control center" is cheap, and adaptable to that use. It's not as good as a half-moon, but it's better than a footswitch.
Last edited by Mooser on 14 Dec 2012, 22:25, edited 1 time in total.
Mooser
 
Posts: 363
Joined: 07 Oct 2011, 20:01
Has thanked: 149 times
Been thanked: 55 times
Your Nord Gear #1: Nord C2

Re: Homemade half moon switch

Postby flmc59 » 15 Dec 2012, 02:24

Switch sleve to ring or tip.
No connecetion to either gives you stop
flmc59
 
Posts: 326
Joined: 04 Jan 2012, 01:11
Has thanked: 0 time
Been thanked: 89 times
Your Nord Gear #1: Nord C1
Your Nord Gear #2: Nord C2

Re: Homemade half moon switch

Postby bboyjamin » 18 Dec 2012, 00:42

Great! Thanks everyone. I picked up a couple of three way guitar switches to try it out with. I'll let you know how it goes.
bboyjamin
 
Posts: 23
Joined: 12 Dec 2012, 02:15
Country: Canada
Has thanked: 2 times
Been thanked: 8 times

Re: Homemade half moon switch

Postby bboyjamin » 29 Dec 2012, 10:01

I have a working prototype Half Moon Switch for C2, which I made at home with materials on hand. Here are my notes and pictures, I hope it helps.

It's just my first try, so it's kinda ghetto, not pretty. But works and sounds good.

I'm not a pro. Attempt this at your own risk.

Materials:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3-way guitar switch, Retro Parts RP181B. This switch is not the smoothest, so I'd shop around a bit if I were you. $10
4" square steel top plate for an electrical box, $3
TRS connector and cable which I cut off an old piece of equipment, 2.5 ft is plenty long
2 ea. metric screws, 4mm diameter, about 5mm long. For mounting the box to the keyboard
2 ea. small nuts and bolts to mount the guitar switch to the box
zip tie for strain relief
flux and solder

Equipment:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gloves
Glasses
(sparks will fly, and things are sharp)

Tools:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dremmel, with 1" cutoff discs
Drill, and bits up to 1/2"
Grinder and zip discs
Clamp
Multimeter
Soldering iron
Screw drivers
Pliars
Cold chisel
hammer


Measurments:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1. Keyboard: mount holes are 2 3/4" apart and set back 5/8", they require metric 4mm screws
kbd diagram.JPG
keyboard measurements
kbd diagram.JPG (321.88 KiB) Viewed 10198 times


2. Switch: the body is 1" tall, so it will fit nicely underneath the keys. The top of the lever will be about 3" below the key tops.
switch diagram.JPG
switch measurements
switch diagram.JPG (229.93 KiB) Viewed 10198 times


3. Wiring: the dashed lines show the connections made in each switch position.
TIP-SLEEVE = SLOW
RING-SLEEVE = FAST
NC = not connected
wiring diagram.JPG
wiring diagram
wiring diagram.JPG (187.58 KiB) Viewed 10197 times



Making the switch:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

It's just a prototype and I don't weld, so I decided to fold a steel plate into a box to house the switch.

Make the box big enough for the switch and leave some wiggle room.

Here I am cutting a slot with the dremmel and cut off discs. Stack the discs to make a wider slot.
1.JPG
dremmel cutting the coin slot
1.JPG (96.9 KiB) Viewed 10198 times


Here's the shape of my cut out:
2.jpg
cutout steel plate
2.jpg (109.04 KiB) Viewed 10198 times


Here I've started to fold the box into shape. I used a cold chisel to hammer out the creases, then the plate folds just right.
3.jpg
box taking shape, with holes for switch
3.jpg (71.87 KiB) Viewed 10198 times


Completed soldering. My soldering skills are marginal.
In my cable RING=RED.
4.jpg
soldering complete
4.jpg (128.09 KiB) Viewed 10198 times


Switch mounted in the box. I couldn't find screws to fit that guitar switch. They might be a #5 screw. I drilled the holes out and through-bolted with some #6's I found. Below the switch, I drilled a 1/2" hole for cable egress, and 2 x 3/16" holes to zip-tie the cable for strain relief..... ghetto!
Also, there's a tension spring on the guitar switch. I pulled that off because I thought the action was too stiff.
5.jpg
switch mounted in box
5.jpg (71.67 KiB) Viewed 10198 times


strain relief viewed from the bottom.
6.jpg
strain relief
6.jpg (93.24 KiB) Viewed 10198 times


After mounting the switch in the box, and setting up the strain relief. I gave it a final continuity test with the meter. Then I folded the bottom flap up, and installed it on my Nord.

There's a menu setting on the Nord to select the half moon switch. System menu #8, select HA.

Here is the diy half-moon switch on the Nord.
7.jpg
box mounted on keyboard
7.jpg (100.7 KiB) Viewed 10198 times





I took my C2 for my first gig tonight, so I didn't have time to paint the switch. It worked great!

Thanks everyone for helping me build a switch for one tenth of the cost.

Let me know if you have any improvements or ideas!
Last edited by bboyjamin on 29 Dec 2012, 10:09, edited 1 time in total.

The author bboyjamin was thanked by 3 members, including:
GeorgeNS2exandi85Mr_-G-
bboyjamin
 
Posts: 23
Joined: 12 Dec 2012, 02:15
Country: Canada
Has thanked: 2 times
Been thanked: 8 times

Re: Homemade half moon switch

Postby marvintheandroid » 15 May 2018, 15:34

Hi guys,
I’ve just finished making my version of the half moon switch with information from this thread. Thanks for the valuable info and measurements. I though I’d post a couple of pictures of the finished object.
Attachments
6310C523-220E-4B34-9BAA-F8CEC03CBDF3.jpeg
6310C523-220E-4B34-9BAA-F8CEC03CBDF3.jpeg (55.13 KiB) Viewed 7644 times
A9DAC0E1-1E8E-4C7C-AAF5-F3410B2CCBE3.jpeg
A9DAC0E1-1E8E-4C7C-AAF5-F3410B2CCBE3.jpeg (61.65 KiB) Viewed 7644 times
BBDE7F29-03A6-4123-8F43-E0AFB975FCC6.jpeg
BBDE7F29-03A6-4123-8F43-E0AFB975FCC6.jpeg (56.59 KiB) Viewed 7644 times
A1803119-8E04-4347-A2C5-FA4D92A5CF11.jpeg
A1803119-8E04-4347-A2C5-FA4D92A5CF11.jpeg (57.75 KiB) Viewed 7644 times
Marvin

Nord Stage 3, Nord Electro 4D 61, Nord Electro 5D 73, Nord A1,Roland FA-08, Roland Jupiter 50, Roland fantom XR, Roland JV80, Apple Mainstage.
marvintheandroid
 
Posts: 39
Joined: 22 Oct 2014, 14:51
Country: Great Britain
Has thanked: 8 times
Been thanked: 3 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Nord Stage 3


Return to Nord C1 / C2 / C2D Organ Forum



Who is online

Users browsing this forum: No registered users and 1 guest

cron