The Nord C1, C2 and C2D Organ Forum

Leslie effect. Help!

Postby blacklodge » 09 May 2018, 15:16

https://www.youtube.com/watch?v=Vsfc5GjEtys

Hello. If you follow this link you will find the song "Circle of hands" by Uriah Heep.
At the 00.56 second you can hear the leslie effect gradually slowing..

How can I create this effect with my C2D ?

Thankls
Gabriele
blacklodge
 
Posts: 28
Joined: 16 May 2012, 12:17
Country: Italy
Has thanked: 0 time
Been thanked: 3 times

Leslie effect. Help!


Sponsor
 

Re: Leslie effect. Help!

Postby Jorvic » 09 May 2018, 16:09

I have a real C3 + 122 (1961) have to say, it seems these beasts vary so much, also I would think some players had their setup tweaked like a custom car to get a certain sound. That UH Hamm is very characteristic of the year and style. I also think players have custom Leslie setups too, it can get very specialist. And to complicate things more, how the Leslie is mic'ed up make a diffence too, and then some players needed two Leslies!!

From what I've tried myself using simulators, it's all to try for. I find one Leslie simulator works well at low speed but not at high, some don't distort too well and so on. Seemingly endless!
I've had a look in the manual for the 5D organ and indeed there seems to be a good number of useful parameters to change, if they can get the sound you want, is only a matter of experimenting.

Usually a Leslie simulator has a "rotor inertia" - or ramp up/slow down speed, this seems only half of the equation, the simulator needs also to be able to do all the sonic magic, the sign of a good simulator.

I want that sound in the UH clip, I just can't get there even with the real thing.
Last edited by Jorvic on 09 May 2018, 16:12, edited 1 time in total.
Jorvic
 
Posts: 6
Joined: 09 May 2018, 14:13
Location: Gloucester
Country: Great Britain
Has thanked: 0 time
Been thanked: 0 time

Re: Leslie effect. Help!

Postby elseif » 10 May 2018, 23:28

Sounds like the slow motor on the drum is unplugged. I know of no commercially available simulator that can do this.
Last edited by elseif on 10 May 2018, 23:29, edited 1 time in total.
elseif
 
Posts: 22
Joined: 20 Jun 2015, 21:25
Country: United States of America
Has thanked: 0 time
Been thanked: 4 times
Your Nord Gear #1: Nord C2D
Your Nord Gear #2: Nord Electro 4

Re: Leslie effect. Help!

Postby WaldenMod66 » 29 Dec 2018, 17:23

elseif wrote:Sounds like the slow motor on the drum is unplugged. I know of no commercially available simulator that can do this.


The Neo Ventilator II pedal allows you to remove the rotary effect on the lower rotor (and upper rotor individually), so you can get that 'memphis' sound. So all you hear is the horn spinning, but the lower rotor stays stationary. I'm pretty sure that's the only Leslie Sim that offers that, other than the Mojo...that also has a 'memphis' option.
User avatar
WaldenMod66
 
Posts: 18
Joined: 22 May 2015, 22:45
Country: Great Britain
Has thanked: 3 times
Been thanked: 2 times
Your Nord Gear #1: Nord Electro 5

Re: Leslie effect. Help!

Postby Rusty Mike » 29 Dec 2018, 18:46

The discontinued GSI BURN can do the Memphis setting as well.
Mike from Central NJ, USA
Tools: Ten fingers, two feet, middle-age brain, questionable judgement and taste
Nords: Piano 5 73, Stage 2EX 76 HP, Electro 6D 73
User avatar
Rusty Mike
 
Posts: 903
Joined: 08 Nov 2011, 21:57
Location: United States
Country: United States of America
Has thanked: 91 times
Been thanked: 507 times
Your Nord Gear #1: Nord Piano 5
Your Nord Gear #2: Nord Electro 6

Re: Leslie effect. Help!

Postby The Franchise » 01 Feb 2019, 18:20

The C2D allows you to choose from 3 acceleration/retardation times; High, Normal, Low. (Sound Menus) You can also choose from 3 Bass/Rotary balance types; 70/30, 60/40, 30/70. The closest you'll get to the Heep sound will be to choose a "Low" retardation speed, and a 70/30 balance. Not sure if that'll do it for you.
What you're hearing on the Heep recording is a result of the belt tension on the rotor, and a heavily mic'd rotor balance. I'd bet the farm on guessing the belt tension was purely happenstance. There is simply no way of "measuring, and selecting' a set accel/decel speed on a well used war horse of a leslie. You can make an adjustment by increasing/decreasing the tension at the motor pulley. But that's strictly trial and error. On top of that, the fabric belt has a "worn and stretch" fact that is unique to it self. To replicate that in a rotary SIM patch, you'd literally need to sample thousands of Leslies, and choose the ones you want to replicate. Good luck!
The Franchise
 
Posts: 66
Joined: 21 May 2013, 14:28
Country: United States of America
Has thanked: 1 time
Been thanked: 12 times
Your Nord Gear #1: Nord C2D

Re: Leslie effect. Help!

Postby Bogey » 22 May 2020, 18:36

Yes! you can gradually slow down rotary up to full stop. Neo Ventilator 2, pedal does this brillantly.
Check this video:
https://www.youtube.com/watch?time_cont ... e=emb_logo
Bogey
 
Posts: 2
Joined: 22 May 2020, 12:47
Country: Poland
Has thanked: 2 times
Been thanked: 0 time
Your Nord Gear #1: Nord C2D


Return to Nord C1 / C2 / C2D Organ Forum



Who is online

Users browsing this forum: No registered users and 13 guests