General Discussion of the Nord Stage (EX), Nord Stage 2 (EX), and Nord Stage 3 Synths, FAQ, Troubleshooting etc.

Volume Pedal on NS3

Postby Tomtom1983 » 08 Apr 2018, 10:59

At my NS2 I used a Roland EV5 to controll the volume. When it was connected it worked automatically for all programs.
Do you know how I can do the same at the NS3? When it is connected the volume shows no reaction, only if I set it by morph. But do I have to set it for each program now?
Tomtom1983
Patch Creator
 
Posts: 43
Joined: 03 Apr 2013, 17:55
Country: Germany
Has thanked: 3 times
Been thanked: 1 time
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 2

Volume Pedal on NS3


Sponsor
 

Re: Volume Pedal on NS3

Postby NordMarkus » 08 Apr 2018, 12:04

Try to use the organ swell-jack with the Exp.pedal.. this works perfectly over all programs! See also on page 53 in the manual
NordMarkus
 
Posts: 28
Joined: 13 Jan 2015, 13:23
Country: Germany
Has thanked: 0 time
Been thanked: 15 times
Your Nord Gear #1: Nord Stage 3

Re: Volume Pedal on NS3

Postby NordMarkus » 08 Apr 2018, 12:06

„System Menu:
11 - sWell Pedal TYPe
This setting con gures a pedal attached to the ORGAN SWELL jack. see “Ctrl Pedal Type” above for details.
Range: Roland EV7 (default), Yamaha FC-7, Korg, Fatar (and Studiologic)
FUNC (FUNCTioN)
This setting con gure the swell Pedal destination. set this to swell if you want this pedal to act as a swell pedal for the organ, or to volume if it should control the volume of all the Nord stage 3 sound engines.
Range: Swell (Default), Volume
GaiN
This setting allows you to add some gain to the output of the pedal. This can be used if an attached pedal does not reach the maximum level or setting.„
NordMarkus
 
Posts: 28
Joined: 13 Jan 2015, 13:23
Country: Germany
Has thanked: 0 time
Been thanked: 15 times
Your Nord Gear #1: Nord Stage 3

Re: Volume Pedal on NS3

Postby Tomtom1983 » 08 Apr 2018, 20:19

I also tried it to use as swell pedal, but the problem was still the same, no reaction. I read the manual many times, even in German, but I couldn‘t fix my problem not yet. There are to little Information about it. Actually I‘m familiar with nord products, but here I‘m feeling stupid. :( Maybe my English is to bad and anybody could post the solution in German?!
Thanks in advance...
Tomtom1983
Patch Creator
 
Posts: 43
Joined: 03 Apr 2013, 17:55
Country: Germany
Has thanked: 3 times
Been thanked: 1 time
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 2

Re: Volume Pedal on NS3

Postby alcools » 09 Apr 2018, 16:41

Is you OS up to date ?
Actual synth: Nord Modular G2 ex - Nord Stage 3 compact - DSI Tetra
Before: Nord Lead 3 & 4R, Stage 1&2, Wave, Virus C & Ti, P6 & P12, and few others...
http://exgovernor.fr
User avatar
alcools
 
Posts: 182
Joined: 06 May 2011, 18:12
Location: Paris
Country: France
Has thanked: 8 times
Been thanked: 31 times
Your Nord Gear #1: Nord Modular
Your Nord Gear #2: Nord Stage 3

Re: Volume Pedal on NS3

Postby catosim » 09 Apr 2018, 17:16

Hi there

just ran a test in my NS3, works fine.
If you go to system-settings menu 11- swell pedal, there you need to assign the pedal to function (FUNC) as volume (not swell) pedal.
When you do this, the pedal should control the main volume on every soundprogram.
Be sure to connect the FC to organswell-jack, not controlpedal-jack.

Regards Cato
catosim
 
Posts: 24
Joined: 06 Nov 2017, 22:58
Location: Norway
Country: Norway
Has thanked: 5 times
Been thanked: 4 times
Your Nord Gear #1: Nord Stage 3

Re: Volume Pedal on NS3

Postby Tomtom1983 » 09 Apr 2018, 18:30

Problem is solved, now. Thx ;-)
Tomtom1983
Patch Creator
 
Posts: 43
Joined: 03 Apr 2013, 17:55
Country: Germany
Has thanked: 3 times
Been thanked: 1 time
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 2


Return to Nord Stage Forum



Who is online

Users browsing this forum: Murphy and 13 guests