Hi all,
I'm now familiar with getting programs (=sounds) from my KORG 01W to my NS2 via MIDI.
However there is another big task for me.
As you might know KORG differentiates between programs and combinations (= set of max. 8 programs), each of them in a bank A and a bank B. So the 01W hat 100 programs in bank A and 100 programs in bank B, as well as 100 combinations in bank A and 100 in bank B.
My question is: Is there a MIDI command for my NS2 that allows me to not only switch from one sound (program) to another but to switch from programs to combinations and viceversa, too. E.g. from PROGRAM A21 to COMBINATION B41.
I think that there is a command that makes that possible.
Can anyone help ?
Thanks so much in advance.
Joe
Nord Stage and MIDI tutorial
-
JoeKey
- Posts: 17
- Joined: 06 Sep 2014, 16:01
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Electro 6
- Has thanked: 6 times
Re: Nord Stage and MIDI tutorial
Hammond B3 with Leslie 122, Nord Stage 2, Nord Electro 6D, Nord Lead A1, Roland A-90, Roland Jupiter-50, Roland FA-06, Roland BK-7m, Roland SC-880, Korg Krome 73, Korg 01W/FD, Solton MS-100, Yamaha FP-100
-
kblok
- Posts: 18
- Joined: 30 Sep 2014, 19:59
- Your Nord Gear #1: Nord Stage 2
- Has thanked: 6 times
- Been thanked: 6 times
Re: Nord Stage and MIDI tutorial
I think the Korg would need to receive two commands, a Mode Change (I think the 01 is prepared for that) and a Program change.
I believe that you won't be able to send these two commands easily.
Kblok
I believe that you won't be able to send these two commands easily.
Kblok
-
robinlechols
- Posts: 7
- Joined: 03 Jun 2014, 00:58
- Your Nord Gear #1: Nord Piano
- Has thanked: 3 times
Re: Nord Stage and MIDI tutorial
As a new person to this whole MIDI world... this was wonderful! Thank you so much!
-
neolithic
- Patch Creator
- Posts: 712
- Joined: 13 Nov 2014, 18:21
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Lead 1/2/2x
- Has thanked: 316 times
- Been thanked: 351 times
Re: Nord Stage and MIDI tutorial
This is a really professional piece of work and puts to shame a lot of the official documentation released with hardware!
Really appreciate the effort you put into this - thanks!
Really appreciate the effort you put into this - thanks!
And now for something completely different...
-
Thewiltshire
- Posts: 1
- Joined: 01 Mar 2015, 06:06
- Your Nord Gear #1: Nord Stage 2
-
Aasmundivarjord
- Posts: 1
- Joined: 22 Apr 2015, 20:20
- Your Nord Gear #1: Nord Stage 2
Re: Nord Stage and MIDI tutorial
Hey guys!
Kinda new to the Nord Stage, and this sight for that matter. So, I wanted to get this midi thing going on my Nord Stage. But I found not figure out how to download this document, could any of you please help me?
Senserly Åsmund Ivarjord - Norway (explained the english)
Kinda new to the Nord Stage, and this sight for that matter. So, I wanted to get this midi thing going on my Nord Stage. But I found not figure out how to download this document, could any of you please help me?
Senserly Åsmund Ivarjord - Norway (explained the english)
-
Mr_-G-
- Moderator
- Posts: 4624
- Joined: 18 Aug 2012, 16:48
- Your Nord Gear #1: Nord Stage 2
- Has thanked: 1419 times
- Been thanked: 1230 times
Re: Nord Stage and MIDI tutorial
Welcome!
See the menu bar above, where it says downloads, you click there and will take you to a page with a large green button that says "Download"
See the menu bar above, where it says downloads, you click there and will take you to a page with a large green button that says "Download"
-
mboylemusic
- Posts: 8
- Joined: 25 Jun 2015, 10:36
- Your Nord Gear #1: Nord Stage 2
- Has thanked: 3 times
Re: Nord Stage and MIDI tutorial
Hi there,
I'm wondering if somebody could help me. I have a Nord Stage 2 and am trying to run RMS Keyboards through my computer. It's a program with all the patches inbuilt for playing in musicals. I have connected the Nord to my computer (PC) via a USB cable. The program recognises that there is a Nord Stage 2 connected, but I can't get anything else to work. No sound comes out, I can't assign keys for sorting through sounds, nothing is happening... I've tried to hard to read all the comments and have downloaded the Nord Stage MIDI Document and read it, but I can't make sense of what I'm supposed to do. If there is a link, or somebody who can help, I would appreciate it. I think all I am trying to do is turn my Nord Stage 2 into a slave to produce whatever sounds the program is telling it to produce. I don't need any other settings on the Nord to work, except perhaps volume... Thanks so much for any help that anybody can give because I have spent hours going through the MIDI settings on the Nord and it just doesn't make sense to me.
Huge thanks in advance,
Mark
I'm wondering if somebody could help me. I have a Nord Stage 2 and am trying to run RMS Keyboards through my computer. It's a program with all the patches inbuilt for playing in musicals. I have connected the Nord to my computer (PC) via a USB cable. The program recognises that there is a Nord Stage 2 connected, but I can't get anything else to work. No sound comes out, I can't assign keys for sorting through sounds, nothing is happening... I've tried to hard to read all the comments and have downloaded the Nord Stage MIDI Document and read it, but I can't make sense of what I'm supposed to do. If there is a link, or somebody who can help, I would appreciate it. I think all I am trying to do is turn my Nord Stage 2 into a slave to produce whatever sounds the program is telling it to produce. I don't need any other settings on the Nord to work, except perhaps volume... Thanks so much for any help that anybody can give because I have spent hours going through the MIDI settings on the Nord and it just doesn't make sense to me.
Huge thanks in advance,
Mark