16 posts
• Page 2 of 2 • 1, 2
Re: EXTERN program change issue
Gig Performer has a midi monitor window you can open? Open it up and tell us what the Nord is transmitting. I’d set GP to ignore bank messages for the time being to keep things simple if you can. Also, dare I also mention the obvious,,,, the extern section has actually been turned on? Good luck.
- Lamacanyon
- Posts: 10
- Joined: 07 Apr 2019, 12:25
- Has thanked: 3 times
- Been thanked: 5 times
- Your Nord Gear #1: Nord Stage 3
Re: EXTERN program change issue
Lamacanyon wrote:Gig Performer has a midi monitor window you can open? Open it up and tell us what the Nord is transmitting. I’d set GP to ignore bank messages for the time being to keep things simple if you can. Also, dare I also mention the obvious,,,, the extern section has actually been turned on? Good luck.
This is an easy thing to miss, Make sure you hit Shift+Zone select to turn on Extern section. All the zone lights will be lit. Then Extern is activated. Hit Shift+ Zone select again to turn off midi note data. The red LEDs will remain lit in the Extern section and your configured parameters should be sent.
-dj
Last edited by DJKeys on 13 Apr 2022, 20:57, edited 1 time in total.
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys - Patch Creator
- Posts: 2028
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 408 times
- Been thanked: 811 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
Re: EXTERN program change issue
I selected a patch that is supposed to be sending a PC of 1. This is a screenshot of my MIDI monitor in GP. No MIDI PC filter set in GP.
- Attachments
-
- Screen Shot 2022-04-13 at 3.51.54 PM.png (137.89 KiB) Viewed 873 times
- musicbysterling
- Posts: 34
- Joined: 29 May 2013, 21:23
- Location: Seattle, WA
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Stage 3
Re: EXTERN program change issue
Here's a screenshot of my MIDI monitor in GP. The program I selected on the Stage is supposed to be sending PC #1.
- Attachments
-
- Screen Shot 2022-04-13 at 3.51.54 PM.png (137.89 KiB) Viewed 872 times
- musicbysterling
- Posts: 34
- Joined: 29 May 2013, 21:23
- Location: Seattle, WA
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Stage 3
Re: EXTERN program change issue
Please send a screenshot of the Extern section on the front panel. Also send screenshots of the Extern pages. It should look like this:
Midi Channel Usage-Per program
Midi Channel 7 (should be same as receiver)
Send on Load-On
Bank MSB-0, Bank LSB-0, Program Number- (desired program on receiver)
Keep in mind, some devices start counting at 0 not 1.
-dj
Midi Channel Usage-Per program
Midi Channel 7 (should be same as receiver)
Send on Load-On
Bank MSB-0, Bank LSB-0, Program Number- (desired program on receiver)
Keep in mind, some devices start counting at 0 not 1.
-dj
Last edited by DJKeys on 14 Apr 2022, 02:27, edited 1 time in total.
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys - Patch Creator
- Posts: 2028
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 408 times
- Been thanked: 811 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
- musicbysterling
- Posts: 34
- Joined: 29 May 2013, 21:23
- Location: Seattle, WA
- Country:
- Has thanked: 0 time
- Been thanked: 1 time
- Your Nord Gear #1: Nord Stage 3
16 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: kmrgtr and 47 guests