Nord User Forum

[wkrbee]

Wild shot in the dark. Any way to add an effects loop to the NS3? Can't stand the "Overdrive" but putting a outboard one on the output ends up having it after the Leslie sim. I thought about taking i+2 outputs running to outboard gear and sending it back in the Aux input, but that would probably create a feedback loop. Maybe routing out 3+4 and using the Aux input and having 1+2 as the outputs?

[WannitBBBad]

Unfortunately there isn't any way to be able to insert an external effect into the signal chain pre-Leslie. If you have a control pedal, maybe try it on the Swell, as the overdrive breakup is more natural. Though post-Leslie, some users also try a combination of overdrive and drive from the EQ section. Good luck.

[SuperStage]

Wild shot in the dark. Any way to add an effects loop to the NS3? Can't stand the "Overdrive" but putting a outboard one on the output ends up having it after the Leslie sim. I thought about taking i+2 outputs running to outboard gear and sending it back in the Aux input, but that would probably create a feedback loop. Maybe routing out 3+4 and using the Aux input and having 1+2 as the outputs?

The AUX IN is always routed to both the headphones and main outputs 1-2. In the NS3 Manual P54, you can assign the organ, piano and/or synth voices to a SUB output 3-4 and then through an effects chain and back in the AUX IN with no feedback loop. I use this to bypass the internal leslie SIM send the organ to output 3 (mono) and into a Hall of Fame reverb and then into a Neo VENT II and back in the AUX IN and out the Main outputs 1 + 2.

Unfortunately "Sounds using the Rotary effect are always routed to outputs 1-2, regardless of Output Routing settings"

[wkrbee]

I have been using a GSI Burn which has a tube overdrive and Leslie sim with my old EL2. The Burn is still superior to the NS3 overdrive and Leslie sim. I'll try your suggestion SuperStage