Nord User Forum

[jun lee]

I'm Korean so I use google translator sorry
When the volume pedal is used, the knob returns to the beginning?
Is your piano broken?

eagerly waiting for an answer
Help me…

_____________
Ich bin Koreaner, also benutze ich Google Übersetzer, sorry
Verwenden Sie das Lautstärkepedal, um den Regler an den Anfang zurückzustellen
Bist du aufrichtig?

[Nordlicht]

Hi and welcome:

Please don’t use Google translator, it’s producing bad results but try instead DeepL.com for a better translation.
(Google 번역기를 사용하지 마시고 DeepL.com에서 더 나은 번역을 사용해 보세요. )

Which volume/controller pedal are you using with your piano ? Have you checked the pedal settings in the menu?

[jun lee]

Hi and welcome:

Please don’t use Google translator, it’s producing bad results but try instead DeepL.com for a better translation.
(Google 번역기를 사용하지 마시고 DeepL.com에서 더 나은 번역을 사용해 보세요. )

Which volume/controller pedal are you using with your piano ? Have you checked the pedal settings in the menu?

YAMAHA FC7/YES/I set it to FC7 pedal in the menu.

The level goes back to the beginning like in the video I posted
I don't know if that's how it's supposed to be or if it's broken.
The function works fine.
If you have a volume pedal, I would appreciate it if you could test it.

[Nordlicht]

FC7 is good.

Well, basically this is way it’s supposed to work: when the pedal is fully up, then the volume should be at zero and the LED around the knob at the very left position. When the pedal is fully down ("pedal to the metal"), the volume should be at maximum and the LED at the far right position.

[jun lee]

FC7 is good.

Well, basically this is way it’s supposed to work: when the pedal is fully up, then the volume should be at zero and the LED around the knob at the very left position. When the pedal is fully down ("pedal to the metal"), the volume should be at maximum and the LED at the far right position.

The Led display is strange.
The volume goes to 0 but it keeps moving to the right.
Thank you so much for the answer
If it's in the video, it's bad, right?

[Nordlicht]

Hi, I will check it later. I’m receiving just today my new NP5 (the NP5 that I got a few weeks ago was swapped with a new one due to some key problems).
I’ll come back to you.

[jun lee]

Hi, I will check it later. I’m receiving just today my new NP5 (the NP5 that I got a few weeks ago was swapped with a new one due to some key problems).
I’ll come back to you.

Thank you so much for your reply.
I'll wait
+
Please check if the volume pedal goes to the right when connected and reply back.

[Nordlicht]

Hi again, my red baby just arrived!
And it actually seems to be a bug.

I’m also using a FC7 and the LED always jumps to "full" when the pedal isn’t moved for a second.
Although the pedal function (leveling the volume) is working fine.

[Mr_-G-]

What you show in the video is that the LED indicator jumps suddenly to the maximum. That does not look like normal.
Does that happen with all morphs? If so, the pot in the FC7 might be defective or dirty or it could be a short in the cable.

[Nordlicht]

What you show in the video is that the LED indicator jumps suddenly to the maximum. That does not look like normal.
Does that happen with all morphs? If so, the pot in the FC7 might be defective or dirty or it could be a short in the cable.

Well, as you can see there are two different NP5 users noticing the same strange behavior. I only checked it with the piano section, will do a test later with the synth section, too.
My FC7 works flawlessly with my Stage 3 Compact.