Hi.
My audio setup at the moment is..
Mackie Mix 8 running into a Apollo Twin interface
I have a Nord Lead 2 (Rack) running into the Mix 8 channel 2 (1 is being used for a microphone)
I have a Arturia Keystep controller being used to playback the Nord Lead.
I have the midi in/out cables set up properly, as I get sound when I press a key on the keyboard itself.
My problem is, trying to send midi from Ableton to the Nord and use Ableton midi clips as the primary sequencer.
I have an external instrument set up in Ableton Live with the midi going to the Keystep, on channel 1, with audio coming back from my mixer.
Again, I can get sound using the keyboard with the Nord. But, Ableton isn’t sending midi to the Nord via the computer keyboard nor using midi clips.
My Nord is set to midi channel 1 and on manual mode.
So I guess what I’m trying to do is send midi from Ableton, to the Keystep controller, to the Nord.
Any help?
*Forgot to attach a picture of the keystep, but essentially I have both tabs down for midi mode, with the midi out going to the midi in of the Nord and vise versa
Apologies to mods/general users as I also posted this in the General Nord Forum, if that's not acceptable.
1 post
• Page 1 of 1
Nord Lead 2 and receiving midi (via Ableton Live 9)
- Attachments
-
- 20191113_211124.jpg (3.76 MiB) Viewed 1031 times
-
- 20191113_211117.jpg (3.99 MiB) Viewed 1031 times
-
- 20191113_211106.jpg (2.99 MiB) Viewed 1031 times
-
- 20191113_211101.jpg (3.45 MiB) Viewed 1031 times
-
- 20191113_211039.jpg (3.46 MiB) Viewed 1031 times
-
- 20191113_211025.jpg (3.18 MiB) Viewed 1031 times
Last edited by bpbrignac on 14 Nov 2019, 05:26, edited 1 time in total.
- bpbrignac
- Posts: 1
- Joined: 14 Nov 2019, 05:14
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead 1/2/2x
1 post
• Page 1 of 1
Return to Nord Lead / Rack Forum
Who is online
Users browsing this forum: No registered users and 24 guests