Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Sustain port now seems hard coded to midi CC82 and not CC64

Postby PhilipK » 26 Dec 2017, 21:46

This is an odd one. I noticed at my DAW, sustain pedal events from the nord were coming in with cc82 and not cc64. cc82 is for rotary effect toggle. And looking at the nord, pressing the sustain pedal does in fact toggle fast/slow on the rotary effect. However the nord's sustain function isn't happening at all. This goes for the onboard audio as well as midi messages coming out of it. I've tried different pedals. I've tried again with the keyboard no longer attached to computer via usb. I've tried configuring the sustain function as sustain/rotary-toggle (it was already set to sustain-only), powering it off and on again with different the sustain settings options. I've confirmed that the lower or upper part was set to receive sustain messages. I've tried re-uploading firmware 1.42 (it was already up to date). Now I'm backing up my programs and i'll try doing a factory restore, but it seems like that's just for sounds and not an OS level reset. I feel like I already did that with the Update to 1.42 tool.

What on earth is going on here?

Thanks!

-philip

(sorry - electro 5d 61 - OS 1.42)
Last edited by PhilipK on 26 Dec 2017, 21:48, edited 1 time in total.
PhilipK
 
Posts: 10
Joined: 10 Aug 2014, 04:22
Has thanked: 4 times
Been thanked: 1 time
Your Nord Gear #1: Nord Stage 2
Your Nord Gear #2: Nord Lead 4

Sustain port now seems hard coded to midi CC82 and not CC64


Sponsor
 

Re: Sustain port now seems hard coded to midi CC82 and not C

Postby baekgaard » 26 Dec 2017, 23:46

You didn't by accident plug the pedal into the rotary speed pedal instead of the sustain pedal?

Been there, done that... :-)

The author baekgaard was thanked by:
PhilipK
baekgaard
 
Posts: 1716
Joined: 14 Jul 2017, 11:32
Country: Denmark
Has thanked: 702 times
Been thanked: 742 times
Your Nord Gear #1: Nord Electro 6
Your Nord Gear #2: Nord Stage 3

Re: Sustain port now seems hard coded to midi CC82 and not C

Postby PhilipK » 26 Dec 2017, 23:55

Oh my god.

The author PhilipK was thanked by:
baekgaard
PhilipK
 
Posts: 10
Joined: 10 Aug 2014, 04:22
Has thanked: 4 times
Been thanked: 1 time
Your Nord Gear #1: Nord Stage 2
Your Nord Gear #2: Nord Lead 4


Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 20 guests