Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Still another midi problem (NE5D/61)

Postby hwj-d » 29 Jul 2018, 10:17

Hello Forum, :wave:

I'm new member and my first contribution unfortunately is a technical problem with my Electro 5D/61 (what a nice instrument!). Have it the first week, and I'm very happy with it. Set the new Firmware v1.44 to that.

Now i bought a second manual, Fatar TP6 and a midi electronic (Doepfer MKE) that works great together. I set it to a different midi-channel, MKE midi out to midi in, set the upper OR lower part to this channel, and it runs as espected, plays the only sound, that assigned to this part, nothing complicated till here.

The problem is how the 5D behave on its own manual, and that it should have his dedicated upper OR lower ONE sound assigned to that, which it doesn't do, in principle! Tested all sorts of midi settings and his combinations (channel global, -lower, -upper, -split), set them to all possible combinations and channels incl. off. But the NE5D plays still it's layer or splitting, (edit: or nothing, if wrong or off channel) no chance to get that behavior off.

I want to have one sound on one manual, the upper on one, and the lower on the other!
Isn't that possible?

Thanks
Last edited by hwj-d on 29 Jul 2018, 10:31, edited 1 time in total.
hwj-d
 
Posts: 3
Joined: 29 Jul 2018, 08:51
Country: Germany
Has thanked: 1 time
Been thanked: 1 time
Your Nord Gear #1: Nord Electro 5

Still another midi problem (NE5D/61)


Sponsor
 

Re: Still another midi problem (NE5D/61)

Postby anotherscott » 29 Jul 2018, 16:07

MIDI Upper Receive mode is exactly for this. Page 15 of the manual, "scenario 3: Nord Electro 5 receiving MIdI on Part Upper in MIdI Upper receive mode "

The author anotherscott was thanked by:
hwj-d
anotherscott
 
Posts: 3443
Joined: 07 Jan 2011, 04:50
Has thanked: 38 times
Been thanked: 1079 times

Re: Still another midi problem (NE5D/61)

Postby hwj-d » 29 Jul 2018, 18:01

anotherscott wrote:MIDI Upper Receive mode is exactly for this. Page 15 of the manual, "scenario 3: Nord Electro 5 receiving MIdI on Part Upper in MIdI Upper receive mode "

Damn, I had overlooked this "MIDI Upper Rcv" in Split Point Settings.
Problem resolved.

Thanks for your answer.
hwj-d
 
Posts: 3
Joined: 29 Jul 2018, 08:51
Country: Germany
Has thanked: 1 time
Been thanked: 1 time
Your Nord Gear #1: Nord Electro 5


Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 22 guests