Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Re: Newbie can't get organ split working on Electro 3

Postby jmkvalsund » 05 Mar 2016, 18:53

That's OK, but somehow I can't change the splitpoint. It's like the split is fixed on a very low key or not set at all. I can only play the upper voice when in split-mode. When I hold down shift+preset/split, the split-led flashes. If I while holding the buttons down press a key to set a splitpoint, nothing happens. Should there be any kind of receipt/confirmation that a new split-point is set?
jmkvalsund
 
Posts: 11
Joined: 29 May 2015, 21:56
Country: Norway
Has thanked: 2 times
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Nord Lead 4

Re: Newbie can't get organ split working on Electro 3


Sponsor
 

Re: Newbie can't get organ split working on Electro 3

Postby jmkvalsund » 05 Mar 2016, 18:55

That's OK, but somehow I can't change the splitpoint. It's like the split is fixed on a very low key or not set at all. I can only play the upper voice when in split-mode. When I hold down shift+preset/split, the split-led flashes. If I while holding the buttons down press a key to set a splitpoint, nothing happens. Should there be any kind of receipt/confirmation that a new split-point is set?
jmkvalsund
 
Posts: 11
Joined: 29 May 2015, 21:56
Country: Norway
Has thanked: 2 times
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Nord Lead 4

Re: Newbie can't get organ split working on Electro 3

Postby jmkvalsund » 05 Mar 2016, 18:56

That's OK, but somehow I can't change the splitpoint. It's like the split is fixed on a very low key or not set at all. I can only play the upper voice when in split-mode. When I hold down shift+preset/split, the split-led flashes. If I while holding the buttons down press a key to set a splitpoint, nothing happens. Should there be any kind of receipt/confirmation that a new split-point is set?
jmkvalsund
 
Posts: 11
Joined: 29 May 2015, 21:56
Country: Norway
Has thanked: 2 times
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Nord Lead 4

Re: Newbie can't get organ split working on Electro 3

Postby maxpiano » 05 Mar 2016, 19:02

The manual says:

Press the Shift and the Split button to divide the Nord Electro 3 keyboard into
two sections, the Lower Manual and Upper Manual sections By default, the split point on the keyboard is between the keys B3 and C4 You can, however, also set the split point manually by holding Shift + pressing Split, the split LED starts to Flash, then while still holding the buttons press the desired key A set split point is saved as part of the parameters in a program


so the sequence is the one you are doing, once you release the Shift+Split (after having pressed the split point key), the split should be properly set (don't expect any "confirmation", just release the 2 buttons when done), then you have to save it in the current Program (or another Program).

PS: as Pablo suggested, when trying also "Set lower and upper drawbars to radically different settings so that you can clearly hear the differences"
Last edited by maxpiano on 05 Mar 2016, 19:05, edited 3 times in total.
User avatar
maxpiano
Patch Creator
 
Posts: 6188
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 441 times
Been thanked: 2178 times
Your Nord Gear #1: Nord Stage 3

Re: Newbie can't get organ split working on Electro 3

Postby jmbwoodstreet » 22 Apr 2016, 13:02

*SOLVED*

Hey folks - I know this is an old thread, and, by now, the fix might have been found, but I've had the same issue for a long time and just stumbled across the answer. So, at risk of repeating what might be old news - in order to enable the organ preset/split function using just the NE3 board, you first need to make sure that the MIDI setting for split keyboards (SHIFT + MIDI scroll to #6) is turned OFF. If it's on, it disables the split organ feature and split point settings. Once the MIDI setting is corrected, follow the original split/preset directions and enjoy.

The author jmbwoodstreet was thanked by 2 members, including:
peterwpablomastodon
jmbwoodstreet
 
Posts: 1
Joined: 06 Mar 2013, 13:46
Country: United States of America
Has thanked: 0 time
Been thanked: 2 times
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Other Brand

Re: Newbie can't get organ split working on Electro 3

Postby Lofty » 02 Apr 2018, 07:21

marcosalmeida wrote:I had this situation today..

In the MIDI Setup, if the MIDI SPLIT MODE is set to ON, the keyboard understands that the LOWER part will be in another SLAVE keyboard, connected via MIDI cable to the NE3.


Thanks so much for that tip, :yourock: that was driving me crazy.

The author Lofty was thanked by:
peterw
Lofty
 
Posts: 24
Joined: 17 Apr 2016, 12:04
Country: Great Britain
Has thanked: 9 times
Been thanked: 15 times
Your Nord Gear #1: Nord Lead A1
Your Nord Gear #2: Nord Stage 3

Re: Newbie can't get organ split working on Electro 3

Postby white elefant » 03 Oct 2018, 10:10

i just bought a used Nord 4 hp and had the same problem. Now it is solved with your help. Thanks a lot!!!! :thanks: :keyboard2: :clap:
white elefant
 
Posts: 28
Joined: 07 Mar 2014, 10:58
Country: Germany
Has thanked: 3 times
Been thanked: 10 times
Your Nord Gear #1: Nord Stage Classic

Previous

Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 18 guests