Half moon switch for 6D
-
- Posts: 13
- Joined: 02 Aug 2018, 14:03
- 5
- Your Nord Gear #1: Nord Electro 6
Half moon switch for 6D
Just recieved my half moon rotary switch. Great packing by Clavia and install was a breeze. Nice to have that familiar toggle switch where it belongs! Works flawlessly.
-
- Posts: 5
- Joined: 08 Aug 2020, 04:20
- 3
- Your Nord Gear #1: Nord Electro 6
- Your Nord Gear #2: Nord Electro 6
Re: Half moon switch for 6D
Does in screw in from the bottom. I have 3 top screws missing. I bought mine used.
- Coprah66
- Posts: 11
- Joined: 07 Aug 2020, 22:34
- 3
- Your Nord Gear #1: Nord Electro 6
- Your Nord Gear #2: Other Brand
- Location: South of France - CLAIRA
Re: Half moon switch for 6D
Hello,
Can you tell me how the halfpipe is connected to the stereo jack ???? Body principle Stop = Contacts between xx and XX of the jack - Slow position = Contact between XXX and XXX of the Jack - Fast position = contact between X and X and X of the Jack.
Thank you so much. I made mine but I have a doubt about the off position which normally is as if the Leslie is on but no speaker is spinning.
have nice day.
Georges
Can you tell me how the halfpipe is connected to the stereo jack ???? Body principle Stop = Contacts between xx and XX of the jack - Slow position = Contact between XXX and XXX of the Jack - Fast position = contact between X and X and X of the Jack.
Thank you so much. I made mine but I have a doubt about the off position which normally is as if the Leslie is on but no speaker is spinning.
have nice day.
Georges
Music is the surest medium for a successful escape.
Friendships
Georges
Friendships
Georges
- FZiegler
- Donator
- Posts: 2398
- Joined: 15 Dec 2019, 02:41
- 4
- Your Nord Gear #1: Nord Stage 3
- Location: Germany south-west
- Has thanked: 637 times
- Been thanked: 803 times
- Contact:
Re: Half moon switch for 6D
Salut Georges,
as you are asking for a second time, you made me take my multimeter and check my Nord half moon switch.
On the TRS plug, I get this result:
Stop position: no contact at all
Slow position: contact only between T and S
fast position: contact only between R and S
I hope I didn't make any mistake.
Just to complete: You should be able to get a validation from Adri-L
post135546.html
as you are asking for a second time, you made me take my multimeter and check my Nord half moon switch.
On the TRS plug, I get this result:
Stop position: no contact at all
Slow position: contact only between T and S
fast position: contact only between R and S
I hope I didn't make any mistake.
Just to complete: You should be able to get a validation from Adri-L
post135546.html
Last edited by FZiegler on 09 Nov 2020, 12:14, edited 2 times in total.
Stage 3 Compact (Rev.B 2.1 - OS 2.60) - Kawai VPC1 / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung tablet with MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars