Hi guys,
I'm trying to record my Electro into garageband track. I've plugged the usb, and garageband identify Electro, I can use it as a keyboard, but it only plays the garageband's sounds. For some reason I can't make it play the electro sounds. Any ideas? I'm desperate, gone over google with this problem and found nothing...
6 posts
• Page 1 of 1
- shaytavor
- Posts: 6
- Joined: 27 Nov 2020, 13:15
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead A1
Re: Electro and Garageband
Hi shaytavor,
would have been better to read the manual than file the whole internet for information.
I know of no Nord that would cover audio data over USB. It only provides data services (upload/download samples or programs and OS updates) and MIDI-over-USB.
If you want to record audio, you'll need to establish an audio connection - either through the headphone jack or (better) audio-out.
would have been better to read the manual than file the whole internet for information.
I know of no Nord that would cover audio data over USB. It only provides data services (upload/download samples or programs and OS updates) and MIDI-over-USB.
If you want to record audio, you'll need to establish an audio connection - either through the headphone jack or (better) audio-out.
Stage 3 Compact (Rev.B 2.1 - OS 2.60) - Kawai VPC1 / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung tablet with MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars
-
FZiegler - Donator
- Posts: 2370
- Joined: 15 Dec 2019, 02:41
- Location: Germany south-west
- Country:
- Has thanked: 631 times
- Been thanked: 793 times
- Your Nord Gear #1: Nord Stage 3
Re: Electro and Garageband
Thanks,
Actually I've read it but apparently didn't understand it well, because it just says "plug the usb and TaDam!!!"
I'll check it out, thanks
Shay
Actually I've read it but apparently didn't understand it well, because it just says "plug the usb and TaDam!!!"
I'll check it out, thanks
Shay
- shaytavor
- Posts: 6
- Joined: 27 Nov 2020, 13:15
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead A1
Re: Electro and Garageband
Depending on your computer, you probably need an audio interface to connect audio-out from the Nord to your computer. Most built-in ones at least on Windows computers aren't good for anything but phone calls, starting with latency problems. Good audio interfaces reduce latency below 10 ms.
Stage 3 Compact (Rev.B 2.1 - OS 2.60) - Kawai VPC1 / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung tablet with MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars
-
FZiegler - Donator
- Posts: 2370
- Joined: 15 Dec 2019, 02:41
- Location: Germany south-west
- Country:
- Has thanked: 631 times
- Been thanked: 793 times
- Your Nord Gear #1: Nord Stage 3
Re: Electro and Garageband
shaytavor wrote:Thanks,
Actually I've read it but apparently didn't understand it well, because it just says "plug the usb and TaDam!!!"
I'll check it out, thanks
Shay
Assuming you are aware of the difference between MIDI and Audio data flows, Nord Electro supports only MIDI via USB, so if you need to record audio you need an audio interface for your PC with at least 2 mono (i.e. 1 stereo) inputs and connect the NE outputs to it, then create an Audio track in GB to record that audio input.
Last edited by maxpiano on 06 May 2022, 09:05, edited 1 time in total.
-
maxpiano - Patch Creator
- Posts: 6243
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 447 times
- Been thanked: 2194 times
- Your Nord Gear #1: Nord Stage 3
- shaytavor
- Posts: 6
- Joined: 27 Nov 2020, 13:15
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead A1
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 34 guests