Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Electro 5d split mode for Doors tribute band

Postby terramax » 23 May 2023, 01:03

Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:

1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?

Thank you very much for all your help :)
terramax
 
Posts: 2
Joined: 23 May 2023, 00:35
Country: Peru
Has thanked: 0 time
Been thanked: 0 time

Electro 5d split mode for Doors tribute band


Sponsor
 

Re: Electro 5d split mode for Doors tribute band

Postby Tasten-Bert » 23 May 2023, 09:11

terramax wrote:Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:

1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?

Thank you very much for all your help :)


Hi Max

and a very warm welcome to this wonderful forum or nord enthusiasts.

As your points are concerned:

1. Yes
2. Yes
3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.
4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.

Good luck, and cheers from sunny Italy
| nord electro 5D 61 and korg X50 on k&m 18880 or 18950 stand | iPad mini 5 with Set List Maker | phonic AM120 submixer |


... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20
User avatar
Tasten-Bert
Donator
 
Posts: 837
Joined: 17 Feb 2015, 11:57
Location: Where there is friendship, love and music ...
Country: Germany
Has thanked: 152 times
Been thanked: 359 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Other Brand

Re: Electro 5d split mode for Doors tribute band

Postby maxpiano » 23 May 2023, 11:24

Tasten-Bert wrote:
terramax wrote:3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.

4. Can I power my midi controller with the USB port of the Electro?

3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.

4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.

3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: no

4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.
Last edited by maxpiano on 23 May 2023, 14:31, edited 8 times in total.
User avatar
maxpiano
Patch Creator
 
Posts: 6188
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 441 times
Been thanked: 2178 times
Your Nord Gear #1: Nord Stage 3

Re: Electro 5d split mode for Doors tribute band

Postby Normski » 23 May 2023, 12:19

terramax wrote:Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:

1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?

Thank you very much for all your help :)


Hi Max
I know you have asked about an Electro 5 but i was sure it was also posible with a 6D.
So i have just set up my 6D to see if its posible.

1. Yes 6D works great with an ext KB for the lower part. I set up a bass.
2. Yes 6d each seperate control and sustain on/off.
3, Yes. After reading Berts post, I re read the manual 2.6, and still did not find any mention of output routing, So i checked and there is.
Its sytem menu page 16. main to left and organ to the right. actually this appears to be lower to the left, upper to the right.
So Bass to left and piano and/or organ to the right Is possible.
4. No
Cheers Norm

Heres a guide to setting up an ext kb.
https://www.youtube.com/watch?v=xXvSrOf_WRU
Last edited by Normski on 26 May 2023, 12:41, edited 2 times in total.
Normski
 
Posts: 103
Joined: 28 Aug 2018, 23:09
Location: Newcastle England
Country: Great Britain
Has thanked: 54 times
Been thanked: 47 times
Your Nord Gear #1: Nord Stage 2
Your Nord Gear #2: Nord Electro 6

Re: Electro 5d split mode for Doors tribute band

Postby terramax » 23 May 2023, 23:51

maxpiano wrote:
Tasten-Bert wrote:
terramax wrote:3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.

4. Can I power my midi controller with the USB port of the Electro?

3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.

4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.

3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: no

4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.


Thanks for your help. Can i replicate output routing with some sort of panning option?
terramax
 
Posts: 2
Joined: 23 May 2023, 00:35
Country: Peru
Has thanked: 0 time
Been thanked: 0 time

Re: Electro 5d split mode for Doors tribute band

Postby maxpiano » 24 May 2023, 00:10

Unfortunately not, there is no panning control on NE (you would have seen it mentioned in its manual, otherwise)
Last edited by maxpiano on 24 May 2023, 00:11, edited 1 time in total.
User avatar
maxpiano
Patch Creator
 
Posts: 6188
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 441 times
Been thanked: 2178 times
Your Nord Gear #1: Nord Stage 3

Re: Electro 5d split mode for Doors tribute band

Postby Tasten-Bert » 24 May 2023, 22:09

maxpiano wrote:
Tasten-Bert wrote:
terramax wrote:3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.

4. Can I power my midi controller with the USB port of the Electro?

3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.

4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.

3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: no

4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.


Back to point 3 again:
My answer „Yes“ was indeed given to what the OP asked, and my amendment was an additional info about how to organize the sound sections to achieve his goal. I should have added that in SYSTEM MENU on page 11 the output routing has to be set to LOWER = LEFT, UPPER = RIGHT, but I thought that everybody has already read the manual!

You need to know that NE5 has an output routing option different from NE6 - based on lower/upper instead of sound sections.

So, terramax, don‘t feel irritated, it will work.

Cheers from rainy Italy
Last edited by Tasten-Bert on 24 May 2023, 22:11, edited 1 time in total.
| nord electro 5D 61 and korg X50 on k&m 18880 or 18950 stand | iPad mini 5 with Set List Maker | phonic AM120 submixer |


... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20

The author Tasten-Bert was thanked by:
maxpiano
User avatar
Tasten-Bert
Donator
 
Posts: 837
Joined: 17 Feb 2015, 11:57
Location: Where there is friendship, love and music ...
Country: Germany
Has thanked: 152 times
Been thanked: 359 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Other Brand

Re: Electro 5d split mode for Doors tribute band

Postby ziberto » 26 May 2023, 22:53

As nord electro 5 owner, I confirm what Tasten-Bert said: the output routing works exactly as terramax asked. :thumbup:

The author ziberto was thanked by:
Tasten-Bert
User avatar
ziberto
 
Posts: 3
Joined: 26 Sep 2022, 16:51
Country: Italy
Has thanked: 14 times
Been thanked: 2 times
Your Nord Gear #1: Nord Electro 5

Re: Electro 5d split mode for Doors tribute band

Postby maxpiano » 27 May 2023, 08:02

Tasten-Bert wrote:
Back to point 3 again:
My answer „Yes“ was indeed given to what the OP asked, and my amendment was an additional info about how to organize the sound sections to achieve his goal. I should have added that in SYSTEM MENU on page 11 the output routing has to be set to LOWER = LEFT, UPPER = RIGHT, but I thought that everybody has already read the manual!

You need to know that NE5 has an output routing option different from NE6 - based on lower/upper instead of sound sections.

So, terramax, don‘t feel irritated, it will work.

Cheers from rainy Italy


Ouch... I stand corrected! :oops: :mrgreen:

A shame then that on NE6 Output Routing was reverted back to the old "per Section" logic, NE5 is much more flexible in this way.

PS: yes we have a rainy May here :-(
Last edited by maxpiano on 27 May 2023, 09:15, edited 3 times in total.
User avatar
maxpiano
Patch Creator
 
Posts: 6188
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 441 times
Been thanked: 2178 times
Your Nord Gear #1: Nord Stage 3

Re: Electro 5d split mode for Doors tribute band

Postby maurus » 27 May 2023, 10:28

maxpiano wrote:A shame then that on NE6 Output Routing was reverted back to the old "per Section" logic, NE5 is much more flexible in this way.


Yes I agree. Add to that certain MIDI capabilities and a slightly different sound in the output stage. Perhaps we should establish a NE5 fan club here - count me in :)

(Just joking, of course. But after I had NE5 and NE6 side by side for a while, I kept NE5 and sold NE6 again, since I did not need the things the 6 can do better than the 5.)
User avatar
maurus
 
Posts: 456
Joined: 26 Jun 2011, 11:34
Has thanked: 81 times
Been thanked: 130 times
Your Nord Gear #1: Nord Electro 5
Your Nord Gear #2: Other Brand


Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 18 guests