The Nord C1, C2 and C2D Organ Forum

Using 11-pin Motion Sound and Ventilator at the same time

Postby Nordstrater » 16 Jun 2014, 09:32

Is it possible to use a Motion Sound Ms 1771 with the 11-pin cable and a neo ventilator leslie sim at the same time?
There is no signal at the main out if you have the 11 pin plugged in, so what to do? Using the headphone out or the high level output. Does these outs work with the neo ventilator without risking of doing harm?
Nordstrater
 
Posts: 1
Joined: 16 Jun 2014, 08:54
Country: Germany
Has thanked: 0 time
Been thanked: 0 time
Your Nord Gear #1: Nord C2
Your Nord Gear #2: Nord Electro 3

Using 11-pin Motion Sound and Ventilator at the same time


Sponsor
 

Re: Using 11-pin Motion Sound and Ventilator at the same tim

Postby Mooser » 16 Jun 2014, 19:24

As far as I know, if the program options are correctly set, you get a signal at the 11-pin, and the L&R outputs. Check your manual. I run out the 11-pin to a Leslie, and take the signal from L or R output for echo channel.
'Shift' to 'System' and check options at 2 and 3 on the menu.
Also check which software version you are using. I hope this helps.
Mooser
 
Posts: 363
Joined: 07 Oct 2011, 20:01
Has thanked: 149 times
Been thanked: 54 times
Your Nord Gear #1: Nord C2


Return to Nord C1 / C2 / C2D Organ Forum



Who is online

Users browsing this forum: No registered users and 7 guests