Hi
I am not able to get my C2 to toggle fast and slow speeds with a foot switch. It will only work in the momentary switch mode. I have tried several pedals and this seems to have started when I updated the software to 2.0 but I can't be sure. Will someone with a C2 check this out for me? I would be grateful.
Thanks from Seattle,
C2manyStages
7 posts
• Page 1 of 1
- C2manyStages
- Posts: 8
- Joined: 25 Sep 2011, 18:13
- Has thanked: 4 times
- Been thanked: 2 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord C2
Re: C2 Rotary speed footswitch problem
Do you mean that with a momentary foot switch you can't change speeds, or you have to hold down the pedal to maintain tremelo?
Pretty sure that's how it works. I intend on getting the half-moon switch to circumvent that.
P.S for the rock thing I ride the footswitch constantly!!
Pretty sure that's how it works. I intend on getting the half-moon switch to circumvent that.
P.S for the rock thing I ride the footswitch constantly!!
Last edited by Michael Wright on 19 Oct 2012, 01:52, edited 2 times in total.
-
Michael Wright - Donator
- Posts: 236
- Joined: 03 Dec 2011, 00:14
- Location: Ontario Canada
- Country:
- Has thanked: 49 times
- Been thanked: 57 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord C2
Re: C2 Rotary speed footswitch problem
It gives you a choice of "momentary" (only fast while foot is pressed) and "Toggle" (one foot press and release to change speed). I am almost certain that this functioned properly before I updated. It works fine with my half moon (Nord) but only works at momentary with a standard sustain pedal. I was hoping someone would hook up a sustain pedal to the rotary speed jack and change the settings to momentary and toggle and confirm that this works correctly on his/her C2.
Thanks
Thanks
- C2manyStages
- Posts: 8
- Joined: 25 Sep 2011, 18:13
- Has thanked: 4 times
- Been thanked: 2 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord C2
Re: C2 Rotary speed footswitch problem
I just did and it works just fine. I had never switched it before now. Version 2.00
Last edited by Michael Wright on 19 Oct 2012, 02:32, edited 1 time in total.
-
Michael Wright - Donator
- Posts: 236
- Joined: 03 Dec 2011, 00:14
- Location: Ontario Canada
- Country:
- Has thanked: 49 times
- Been thanked: 57 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord C2
Re: C2 Rotary speed footswitch problem
You got me thinking, so I tried three different pedals, a Yamaha FC-5, FC-4 and a crappy old Boss one. All worked the sim in Toggle mode. Cheers Mike
-
Michael Wright - Donator
- Posts: 236
- Joined: 03 Dec 2011, 00:14
- Location: Ontario Canada
- Country:
- Has thanked: 49 times
- Been thanked: 57 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord C2
Re: C2 Rotary speed footswitch problem
Thanks Mike,
It must be a problem with my control input jack. No big deal, I use the buttons usually and have the halfmoon as well.
Thanks again.
Steve
It must be a problem with my control input jack. No big deal, I use the buttons usually and have the halfmoon as well.
Thanks again.
Steve
- C2manyStages
- Posts: 8
- Joined: 25 Sep 2011, 18:13
- Has thanked: 4 times
- Been thanked: 2 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord C2
-
Michael Wright - Donator
- Posts: 236
- Joined: 03 Dec 2011, 00:14
- Location: Ontario Canada
- Country:
- Has thanked: 49 times
- Been thanked: 57 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord C2
7 posts
• Page 1 of 1
Return to Nord C1 / C2 / C2D Organ Forum
Who is online
Users browsing this forum: No registered users and 10 guests