I am on the verge of buying the NS3 as the core of my setup...
But my problem is that i need to controll 3 midi channels for extra sounds..
First there is the SD40 from ketron
Its for solo gigging..
I will use 1 midi channel for controlling arrangement parts
And another midi channel for comtrolling the right hand high quallity traditional solo sounds..
But i also want to controll my vst’s on my macbook(mainstage) on a 3rd midi channel..
Now i can live with not having all 3 available at the same time
Since the NS3 only has 2 external cannels
But can i switch midi send channels on an external pannel when i switch registrations
Or are the midi channels set as global vallues?
7 posts
• Page 1 of 1
Re: Using the NS3 as a controller
You can set any of the Midi channels on a per program basis. You could have a number of programs that could be set up to use the midi channel of the device you need to control. You can then set up the extern section for each of these programs to play the correct octave, patch, volume etc for your external modules. I use this method to change patches on my A1 on channel 7. I would also recommend in this case to turn the global midi channel off. The Extern section is one of the most powerful features of the Nord Stage 3.
-dj
-dj
Last edited by DJKeys on 16 Jan 2018, 21:09, edited 1 time in total.
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys - Patch Creator
- Posts: 2023
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 407 times
- Been thanked: 810 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
Re: Using the NS3 as a controller
DJKeys wrote:You can set any of the Midi channels on a per program basis. You could have a number of programs that could be set up to use the midi channel of the device you need to control. You can then set up the extern section for each of these programs to play the correct octave, patch, volume etc for your external modules. I use this method to change patches on my A1 on channel 7. I would also recommend in this case to turn the global midi channel off. The Extern section is one of the most powerful features of the Nord Stage 3.
-dj
Thanks this makes this option viable for me... even allows me to add some of my modules..
Still on the edge troigh, wether going this road
Or choosing Reason as the core of my setup when i get my NS3
And then comtrolling everything from Reason.
Re: Using the NS3 as a controller
DJKeys wrote:You can set any of the Midi channels on a per program basis. You could have a number of programs that could be set up to use the midi channel of the device you need to control. You can then set up the extern section for each of these programs to play the correct octave, patch, volume etc for your external modules. I use this method to change patches on my A1 on channel 7. I would also recommend in this case to turn the global midi channel off. The Extern section is one of the most powerful features of the Nord Stage 3.
-dj
Hey DJ!
Would you tell me how to programm a specific volume, that is send together with a program change on the external section?
Thank you!
- Schulti
- Posts: 129
- Joined: 28 Jul 2015, 13:42
- Country:
- Has thanked: 46 times
- Been thanked: 28 times
- Your Nord Gear #1: Nord Stage 3
Re: Using the NS3 as a controller
Sure-
Page 42 of the User Manual-
-dj
Page 42 of the User Manual-
-dj
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys - Patch Creator
- Posts: 2023
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 407 times
- Been thanked: 810 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
Re: Using the NS3 as a controller
Thank you! So, if i set a specific volume with the knob on the extern section and save the program this volume value will be send each time i call the program?
- Schulti
- Posts: 129
- Joined: 28 Jul 2015, 13:42
- Country:
- Has thanked: 46 times
- Been thanked: 28 times
- Your Nord Gear #1: Nord Stage 3
Re: Using the NS3 as a controller
Yes. You should make sure you are not sending any volume changes with your pedals as well in the extern setup for that program, as they can alter the original setting.
-dj
-dj
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys - Patch Creator
- Posts: 2023
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 407 times
- Been thanked: 810 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: Android and 32 guests