Hi forum.
I'm searching for a nice quality realistic brass section sample/program for my Electro 5D.
I've have been searching all around this site and tried every single upload. But even my favorite at the studio sounds like a cheap midi brass section sound when playing at a gig...
What is Yours favorite at the moment?
Back in time I used an old Korg Triton Classic for brass sounds and it just sound perfectly.
Can I somehow get the sample from that and copy it into my Electro? I know the sample editor software but in practical I don't know how to setup the program etc. When creating your own sample set are you still able to get the different velocity out of the sample or is it just a fixed velocity sample you create?
I still do have the Korg at my place and may be able to get the samples recorded. Is there a friendly guy that might help me setting up the Sample Editor for me?
Thank you in advance.
BR, Rasmus
Forum rules
Share your Programs/Patches for the Nord Electro Series : NE, NE2, NE3, NE4, NE5.
When creating a new topic, it's good to add a prefix in you title that mention one of these Electro version,
e.g., [NE4]: Program for Van Halen - Jump
Share your Programs/Patches for the Nord Electro Series : NE, NE2, NE3, NE4, NE5.
When creating a new topic, it's good to add a prefix in you title that mention one of these Electro version,
e.g., [NE4]: Program for Van Halen - Jump
7 posts
• Page 1 of 1
NE5: Nice realistic brass section program/sample
Last edited by rasmusholt on 11 Jun 2017, 23:53, edited 1 time in total.
-
rasmusholt - Patch Creator
- Posts: 16
- Joined: 02 Jul 2016, 19:49
- Location: Denmark - Odense
- Country:
- Has thanked: 2 times
- Been thanked: 14 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Electro 5
Re: NE5: Nice realistic brass section program/sample
Hi Rasmus,
Have you tried these:
http://www.sc-sounds.com/brass.php
I found some of them quite useful.
Best regards,
Torsten
Have you tried these:
http://www.sc-sounds.com/brass.php
I found some of them quite useful.
Best regards,
Torsten
- echoletter
- Posts: 3
- Joined: 06 Nov 2012, 19:17
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Electro 5
Re: NE5: Nice realistic brass section program/sample
echoletter wrote:Hi Rasmus,
Have you tried these:
http://www.sc-sounds.com/brass.php
I found some of them quite useful.
Best regards,
Torsten
Is there a demo video online somewhere?
- Schulti
- Posts: 129
- Joined: 28 Jul 2015, 13:42
- Country:
- Has thanked: 46 times
- Been thanked: 28 times
- Your Nord Gear #1: Nord Stage 3
Re: NE5: Nice realistic brass section program/sample
Yea, I wish there was a nice horn section sound for blues etc.. Had t-bone, trumpet, Bari sax and an alto.
- iamdave
- Posts: 28
- Joined: 02 Mar 2017, 23:59
- Country:
- Has thanked: 6 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Electro 5
Re: NE5: Nice realistic brass section program/sample
You could try this one. I used this a lot on the Yamaha Motif. It a sound I constructed myself from various ROM samples mixed with a bit of synth in the Motif. Works very well live for general purpose stabs and certain brass lines (uptown funk, walking on sunshine, superstition etc ).
I also have the NE5d, the setting Im using on the sample synth section is : FILTER VEL : ON, Dynamics : 1, (although usually live I just have it on DYNAMICS 2 with FIlter VEL off)
Perhaps it will work for you too!
Alex
I also have the NE5d, the setting Im using on the sample synth section is : FILTER VEL : ON, Dynamics : 1, (although usually live I just have it on DYNAMICS 2 with FIlter VEL off)
Perhaps it will work for you too!
Alex
- Attachments
-
- Function Brass Motif.nsmp
- (1.74 MiB) Downloaded 577 times
-
- Motif Brass.mp3
- (894.71 KiB) Downloaded 1465 times
Last edited by ACCORDIONMAN on 27 Jul 2017, 00:39, edited 1 time in total.
- The author ACCORDIONMAN was thanked by 4 members, including:
- Ikstolbaz • salvasiles71 • melmore76 • Mr_-G-
-
ACCORDIONMAN - Patch Creator
- Posts: 183
- Joined: 07 Feb 2017, 23:27
- Has thanked: 59 times
- Been thanked: 156 times
- Your Nord Gear #1: Nord Electro 5
Re: NE5: Nice realistic brass section program/sample
ACCORDIONMAN wrote:You could try this one. I used this a lot on the Yamaha Motif. It a sound I constructed myself from various ROM samples mixed with a bit of synth in the Motif. Works very well live for general purpose stabs and certain brass lines (uptown funk, walking on sunshine, superstition etc ).
I also have the NE5d, the setting Im using on the sample synth section is : FILTER VEL : ON, Dynamics : 1, (although usually live I just have it on DYNAMICS 2 with FIlter VEL off)
Perhaps it will work for you too!
Alex
Gracias. Hace tiempo buscaba algo asÃ.
- The author salvasiles71 was thanked by:
- twofarmers
- salvasiles71
- Posts: 8
- Joined: 09 Dec 2017, 20:02
- Has thanked: 4 times
- Been thanked: 10 times
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Nord Electro 5
Re: NE5: Nice realistic brass section program/sample
I have now created a sample of my own since I wasn't satisfied with the current Motif Sample. This sample is based on the Motif XF. Just if someone else are looking for a nice brass
nord-user-samples-nsmp-samples-f14/motif-xf-brass-selection-sample-t14835.html
nord-user-samples-nsmp-samples-f14/motif-xf-brass-selection-sample-t14835.html
- The author rasmusholt was thanked by:
- Berretje
-
rasmusholt - Patch Creator
- Posts: 16
- Joined: 02 Jul 2016, 19:49
- Location: Denmark - Odense
- Country:
- Has thanked: 2 times
- Been thanked: 14 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Electro 5
7 posts
• Page 1 of 1
Return to Nord Electro Programs
Who is online
Users browsing this forum: No registered users and 5 guests