Hi all,
I've a new issue with my triple pedal where the right hand pedal no longer does anything, but the other 2 work fine. Plugging a regular pedal into the instrument (and switching pedal type in the menu obvs) restores sustaining power.
I've seen inside a triple pedal and it looks like a whole load of headache for someone as bad at soldering as me.
Based on my symptoms can anyone tell me where to look first?
cheers
Andy
6 posts
• Page 1 of 1
Re: Triple pedal broken
The triple pedal has rubber contacts just like keybeds, which may require some cleaning
-
maxpiano - Patch Creator
- Posts: 6242
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 447 times
- Been thanked: 2193 times
- Your Nord Gear #1: Nord Stage 3
Re: Triple pedal broken
So more on this - in case anyone else has the same problem -
I plugged the pedal in again and it worked fine - for a while. Then I discovered the issue appeared to be orientation-sensitive!! i.e. if I held the pedal vertically it functioned normally, but in a horizontal plane the sustain pedal was permanently on. I could hear the pedal on-off sounds as I moved the unit around.
So I took it apart. (Side question - why is the base plate so heavy?) (side point 2- there's not much in there for £150 is there....)
Nothing obviously loose but further mucking around I have realised I can activate or deactivate the sustain pedal by rolling the cable between my fingers about 2 inches from the back of the pedal box. Surely that's not right?
So my new plan is to shorten the cable by a few inches and re-solder it to the board. Does that sound a good idea?
A
I plugged the pedal in again and it worked fine - for a while. Then I discovered the issue appeared to be orientation-sensitive!! i.e. if I held the pedal vertically it functioned normally, but in a horizontal plane the sustain pedal was permanently on. I could hear the pedal on-off sounds as I moved the unit around.
So I took it apart. (Side question - why is the base plate so heavy?) (side point 2- there's not much in there for £150 is there....)
Nothing obviously loose but further mucking around I have realised I can activate or deactivate the sustain pedal by rolling the cable between my fingers about 2 inches from the back of the pedal box. Surely that's not right?
So my new plan is to shorten the cable by a few inches and re-solder it to the board. Does that sound a good idea?
A
- andymay
- Posts: 23
- Joined: 28 Dec 2011, 19:04
- Has thanked: 2 times
- Been thanked: 3 times
- Your Nord Gear #1: Nord Stage 2
Re: Triple pedal broken
Looks like you found the problem and also the solution, well done.
On the side question 1, the weight helps to keep the pedalboard stable and still on the floor, lightweight pedals are more prone to move around...
On the side question 1, the weight helps to keep the pedalboard stable and still on the floor, lightweight pedals are more prone to move around...
Last edited by maxpiano on 27 Sep 2017, 18:53, edited 4 times in total.
-
maxpiano - Patch Creator
- Posts: 6242
- Joined: 27 Jun 2011, 13:29
- Location: Italy
- Country:
- Has thanked: 447 times
- Been thanked: 2193 times
- Your Nord Gear #1: Nord Stage 3
Re: Triple pedal broken
andymay wrote:So I took it apart. (Side question - why is the base plate so heavy?) (side point 2- there's not much in there for £150 is there....)
That is Swedish steel, therefore the high price.
/Bjørn
- Bjosko
- Posts: 316
- Joined: 18 Mar 2009, 13:30
- Country:
- Has thanked: 19 times
- Been thanked: 119 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Lead A1
Re: Triple pedal broken
I was all set to cut the wire but when I spliced the insulation open I luckily found the place inside where the inner shielding had a break in it.
Few minutes with the black sticky tape and I'm back in business.
I wish they'd make pedals (in general) with a jack socket on the back though so you could easily replace the cable if need be.
Anyway - score!!
A
Few minutes with the black sticky tape and I'm back in business.
I wish they'd make pedals (in general) with a jack socket on the back though so you could easily replace the cable if need be.
Anyway - score!!
A
- andymay
- Posts: 23
- Joined: 28 Dec 2011, 19:04
- Has thanked: 2 times
- Been thanked: 3 times
- Your Nord Gear #1: Nord Stage 2
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: AllanH and 20 guests