Half-moon switch and Leslie 2101 :?:

Steff · Post by **Steff** » 13 Jan 2017, 12:08

Hi,

I consider to buy a Leslie 2101 MK II for my nord C2.
I have one question :
I've got the Half Moon with my Nord to control the speed of the Leslie.
If I plug my nord with a 11pin cable to the Leslie, is the half-moon going to control the Rotor of the Leslie instead of the simulation ?

Thank you for your advice !

Post by **maxpiano** » 13 Jan 2017, 13:22

High level outputs, featuring quarter-inch as well as a 11-pin Leslie standard connectors allows you to connect directly to rotary speak- ers When using the 11-pin connector, the panel controls for rotation speed are transferred as well

(Nord C2D Manual, page 4)

So as long as also the 2101 responds to Leslie speed commands via the 11pin, as I assume it does, you should be OK.

Steff · Post by **Steff** » 13 Jan 2017, 13:29

Oh thanks !
I think it will work too but if someone has already done it.

ebowen4221 · Post by **ebowen4221** » 13 Jan 2017, 19:37

As long as the simulation isn't running it will do both. You don't want to use a leslie sim with the real thing!

Also, here's a pinout guide for all leslie models that is useful for doing other things with older models, if you're handy with a soldering iron.

http://www.captain-foldback.com/Leslie_sub/pinouts.htm

Steff · Post by **Steff** » 15 Jan 2017, 17:01

ebowen4221 wrote:As long as the simulation isn't running it will do both. You don't want to use a leslie sim with the real thing!

Of course, I don't want a sim with a real Leslie !

Nord User Forum

Half-moon switch and Leslie 2101 :?:

Half-moon switch and Leslie 2101 :?:

Re: Half-moon switch and Leslie 2101 :?:

Re: Half-moon switch and Leslie 2101 :?:

Re: Half-moon switch and Leslie 2101 :?:

Re: Half-moon switch and Leslie 2101 :?: