Hello everyone,
I'm new to the forums, so I apologize in advance if this topic has already been out, I could not find it.
The fact is that I have a Beatstep Pro from Arturia and a Nord Stage 2 EX and I want to sync the clocks in both ways, from NS2 to BSP and from BSP to NS2.
The NS2 works fine if BSP act as a master but doesn't works if I try to use NS2 as a master.
I connected both MIDI input and output between them, set the sync led in BSP as MIDI and active the Master Clock in NS2 (I can see in NS2 "Mst Clock Internal" in the led display), but the BSP can't get the NS2 tempo and doesn't active the sequence when I push "play" (nothing happend).
Any advice?
Thank you all!
7 posts
• Page 1 of 1
- fernandorm
- Posts: 6
- Joined: 12 Aug 2016, 09:47
- Country:
- Has thanked: 8 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2 EX
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
Hej!
As far as i remember (sold my NS2) the NS2 can not transmit MIDI clk. Only recieve.
Took a quick look in the manual too ... but no, found nothing about tx of MIDI clk.
Sorry.
But I have kept my Beatstep Pro - very inspiring to play with.
/Vänligen
Michael in Scania
As far as i remember (sold my NS2) the NS2 can not transmit MIDI clk. Only recieve.
Took a quick look in the manual too ... but no, found nothing about tx of MIDI clk.
Sorry.
But I have kept my Beatstep Pro - very inspiring to play with.
/Vänligen
Michael in Scania
Last edited by Marlowes on 12 Aug 2016, 11:09, edited 1 time in total.
NE3HP, NP88, NS2, DPP1, NL2X, NL2X, NLA1, NL4, NE5D, NW2 (Collect Them All?), some classic Rolands, Arturias, a Waldorf, a Kurz, a WONOK3, a pile of guitars, a P-bass, loopers, amps and computers ...
I'm a gearslut!
I'm a gearslut!
- The author Marlowes was thanked by:
- fernandorm
-
Marlowes - Patch Creator
- Posts: 1342
- Joined: 14 Sep 2011, 12:10
- Location: Österlen, Scania
- Country:
- Has thanked: 1820 times
- Been thanked: 594 times
- Your Nord Gear #1: Nord Wave 2
- Your Nord Gear #2: Nord Lead 4
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
best advice is to give up your quest. As Marlowes suggested, the NS2EX does not output clock data. It is not possible to sync your Beatstep Pro to the Nord's internal clock.
Bless, Pablo
Bless, Pablo
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by 2 members, including:
- fernandorm • Marlowes
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
I'll have to give up, yes ,)
Many thanks both of you for your responses!
By the way, did you know if I can control any parameter of the Arturia with the Extern? Or will become a new suicide mission for me??
Best,
Fer.
Many thanks both of you for your responses!
By the way, did you know if I can control any parameter of the Arturia with the Extern? Or will become a new suicide mission for me??
Best,
Fer.
- fernandorm
- Posts: 6
- Joined: 12 Aug 2016, 09:47
- Country:
- Has thanked: 8 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2 EX
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
Hej!
Well ... I have not tried ... the Beatstep Pro is designed to be some kind of "The Controller" ... it even rules my Arturia Spark drummer.
I had a brief look in the BS Pro manual but nothing there - only how you control other units ...
So: the latter ... "Suicide Squad".
/Vänligen
Michael in Scania
Well ... I have not tried ... the Beatstep Pro is designed to be some kind of "The Controller" ... it even rules my Arturia Spark drummer.
I had a brief look in the BS Pro manual but nothing there - only how you control other units ...
So: the latter ... "Suicide Squad".
/Vänligen
Michael in Scania
NE3HP, NP88, NS2, DPP1, NL2X, NL2X, NLA1, NL4, NE5D, NW2 (Collect Them All?), some classic Rolands, Arturias, a Waldorf, a Kurz, a WONOK3, a pile of guitars, a P-bass, loopers, amps and computers ...
I'm a gearslut!
I'm a gearslut!
- The author Marlowes was thanked by:
- fernandorm
-
Marlowes - Patch Creator
- Posts: 1342
- Joined: 14 Sep 2011, 12:10
- Location: Österlen, Scania
- Country:
- Has thanked: 1820 times
- Been thanked: 594 times
- Your Nord Gear #1: Nord Wave 2
- Your Nord Gear #2: Nord Lead 4
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
Let's do it! (patience ON)
Thanks again guys.
Best,
Fer.
Thanks again guys.
Best,
Fer.
- fernandorm
- Posts: 6
- Joined: 12 Aug 2016, 09:47
- Country:
- Has thanked: 8 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 2 EX
Re: BeatStep Pro and Nord Stage 2 - Sync Clocks
fernandorm wrote:By the way, did you know if I can control any parameter of the Arturia with the Extern?
I suppose Marlowe's must know, but speaking generically the Nord's External Sections (Slots A and B) are capable of generating/transmitting 1) volume (cc#7) data, 2) program changes, and 3) any additional midi cc # which you may wish to assign in External Menu. You must ask yourself what the Arturia can do with these data...
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by 2 members, including:
- fernandorm • Marlowes
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests