3 posts
• Page 1 of 1
Bass pedal line out
Does anyone know if you can send the b3 pedal bass sound to a stationary speaker I am a full pedal player looking at purchasing the Nord c2 d I have a b-3 mk2 which has a pedal output which I find great for my pedal playing as it can get lost running through a Leslie
- B-3breakout
- Posts: 1
- Joined: 29 Jan 2016, 06:23
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bass pedal line out
No you can't... it would be nice to have separate outputs for the two keyboards and the pedal.
This is from the C2D manual:
Output Routing L/R Mode
If you want to process your sound using external effects or separate
amplifier systems, it can be convenient to route organs to separate
outputs of the Nord C2D. This setting determines which organs should
be routed to the main left & right outputs.
Range: All, Pipe+Electr (Vox & Farf), Pipe+B3, Pipe.
If the High Level or 11-pin output is not connected, all organs will
be automatically routed to the L&R outputs.
Output Routing ExtRotary Mode
This setting determines which organs should be routed to the 11-pin
and High Level outputs, if these are connected to an external.
Range: B3, Electr, B3+Electr, All.
This is from the C2D manual:
Output Routing L/R Mode
If you want to process your sound using external effects or separate
amplifier systems, it can be convenient to route organs to separate
outputs of the Nord C2D. This setting determines which organs should
be routed to the main left & right outputs.
Range: All, Pipe+Electr (Vox & Farf), Pipe+B3, Pipe.
If the High Level or 11-pin output is not connected, all organs will
be automatically routed to the L&R outputs.
Output Routing ExtRotary Mode
This setting determines which organs should be routed to the 11-pin
and High Level outputs, if these are connected to an external.
Range: B3, Electr, B3+Electr, All.
Nord Stage 3 HP76 / Nord Lead A1R / Nord Rack 3
-
orcoaffamato - Posts: 160
- Joined: 06 Jul 2014, 20:36
- Country:
- Has thanked: 12 times
- Been thanked: 43 times
Re: Bass pedal line out
I use a 24db/octave active crossover. Then I can change at what frequency and level the split is.
I use this one to be precise.
http://www.rolls.com/product.php?pid=SX21
I use this one to be precise.
http://www.rolls.com/product.php?pid=SX21
Nord C2, Nord Stage 2, Moog Sub37, Moog Minitaur
Hammond A100, Wurlitzer P200A
Hammond A100, Wurlitzer P200A
- ebowen4221
- Posts: 97
- Joined: 22 Mar 2012, 18:31
- Location: Moscow, Idaho
- Country:
- Has thanked: 0 time
- Been thanked: 17 times
- Your Nord Gear #1: Nord C2
- Your Nord Gear #2: Nord Stage 2
3 posts
• Page 1 of 1
Return to Nord C1 / C2 / C2D Organ Forum
Who is online
Users browsing this forum: No registered users and 7 guests