Hello, guys.
I`m having a problem that may have a simple solution, but I can`t find it anywhere.
I`m using a Nord Rack with a microKORG XL, using the Korg as a controller. But I noticed that only the "performance mode" sounds are playing. When I switch to Programs, nothing happens when a play the Korg. But when I press TRIG, I can hear the sound.
Anyone knows why?
5 posts
• Page 1 of 1
-
monclarluiz - Posts: 18
- Joined: 05 Oct 2014, 07:39
- Country:
- Has thanked: 2 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead 1/2/2x
- Your Nord Gear #2: Other Brand
Re: Programs not working
I do not know (don't have one), but I guess this may be a problem with MIDI channel setting. Does the rack have a different configuration for performance and program modes? If so I guess that it might covered in the manual.
Last edited by Mr_-G- on 12 Oct 2014, 16:54, edited 2 times in total.
- The author Mr_-G- was thanked by:
- monclarluiz
-
Mr_-G- - Moderator
- Posts: 4616
- Joined: 18 Aug 2012, 16:48
- Has thanked: 1475 times
- Been thanked: 1257 times
- Your Nord Gear #1: Nord Stage 2
-
monclarluiz - Posts: 18
- Joined: 05 Oct 2014, 07:39
- Country:
- Has thanked: 2 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead 1/2/2x
- Your Nord Gear #2: Other Brand
Re: Programs not working
Hi,
Im having a similar issue...just got a Nord Lead 2r, trying to control with a basic Yamaha p-35 midi keyboard. When in "performance mode", it all sounds fine, but when in "Program" or "Manual" mode, i hear the same waveform for each program, with the actual programmed wave in the background (so close, yet so far). Ive check all settings between performance and program mode, but same settings as far as i can tell. btw i am plugging in my headphones to mono headphone jack.
I do notice that when i change the out mode for slots c and d from -.cd to 1.cd the constant waveform changes from a long pulse to a quieter sine wave. (can play the other programs with this if i raise the gain to max, but still has the constant waveform in the background!!)..
really have no clue as I've been testing all parameters in different sequences...would be amazing if anyone could give some help
Im having a similar issue...just got a Nord Lead 2r, trying to control with a basic Yamaha p-35 midi keyboard. When in "performance mode", it all sounds fine, but when in "Program" or "Manual" mode, i hear the same waveform for each program, with the actual programmed wave in the background (so close, yet so far). Ive check all settings between performance and program mode, but same settings as far as i can tell. btw i am plugging in my headphones to mono headphone jack.
I do notice that when i change the out mode for slots c and d from -.cd to 1.cd the constant waveform changes from a long pulse to a quieter sine wave. (can play the other programs with this if i raise the gain to max, but still has the constant waveform in the background!!)..
really have no clue as I've been testing all parameters in different sequences...would be amazing if anyone could give some help
- Norcaljak
- Posts: 3
- Joined: 07 Jan 2016, 22:45
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead 1/2/2x
Re: Programs not working
What are your midi settings for the four slots?
Bless,
Pablo
Bless,
Pablo
bun fyah weh fyah fi bun
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
5 posts
• Page 1 of 1
Return to Nord Lead / Rack Forum
Who is online
Users browsing this forum: No registered users and 24 guests