Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Dazl123 » 24 Dec 2015, 18:43

Hi I have electro 5 connected stereo output into stereo input on yamaha dxr10 then it's linked to another dxr10 - great stereo sound all working well ☺
Next I need to take a output from the dxr10 and feed stereo out to mixer.

There is a thru connection on both speakers
Is this what I should use ???
If I connect a lead from each speaker to mixer is this what I should do ???

Thanks
Last edited by Dazl123 on 24 Dec 2015, 18:44, edited 1 time in total.
Dazl123
 
Posts: 10
Joined: 12 Dec 2015, 14:22
Country: Ireland
Has thanked: 1 time
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 5

Nord Electro 5 To Yamaha Dxr10 To Mixer setup


Sponsor
 

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Arjan P » 25 Dec 2015, 02:06

If I understand you correctly you connect L and R from Nord to one DXR10 at input 2 or 3 and then link that DXR10 to the other. The TRU connection on the DXR10 is AFAIK only useful for input 1, which won't work in that case. If you're going to a mixer anyway, I'd connect the Nord there first and then the DXR10s from the mixer.
Arjan P
 
Posts: 231
Joined: 24 Dec 2012, 01:09
Country: Netherlands
Has thanked: 50 times
Been thanked: 57 times
Your Nord Gear #1: Nord Electro 3

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby RedLeo » 25 Dec 2015, 17:21

Arjan P wrote: If you're going to a mixer anyway, I'd connect the Nord there first and then the DXR10s from the mixer.


If he's talking about his personal mixer for his keyboards, then yes. If he's talking about connecting to a PA mixer, then it would be different.

If you're connecting your Nord to a FOH mixer with Mic inputs, then the best way is to use DI boxes, two mono or one stereo. Connect the outputs from your Nord to the DI box/es, then connect the Thru outputs from the DI boxes to the inputs on the DXR the same as you're doing now.
Finally connect the main (Mic) outputs from the DIs to the mixer. You would use two XLR leads for this.

I'm assuming you're using the jack inputs Inputs 2 Line (Left and Right) to connect to the DXR. If you are doing it this way, then you can't use the Thru sockets because they only work on Input 1.
Last edited by RedLeo on 25 Dec 2015, 17:33, edited 1 time in total.
RedLeo
Patch Creator
 
Posts: 1558
Joined: 07 Aug 2011, 02:08
Has thanked: 140 times
Been thanked: 702 times

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Dazl123 » 27 Dec 2015, 13:06

Here's the setup , NORD Electro stereo l/R to left yamaha dxr 10 stereo input l/R.

Then : the left speaker is linked to the right giving stereo ( very simple ) one lead only involved

No Mixer involved or di box's

Now to output to mixer it seems I take a feed from the back of each speaker to the desk

Am I correct thanks
yamaha-dxr10-rear_1.jpg
yamaha-dxr10-rear_1.jpg (479.45 KiB) Viewed 2735 times
Dazl123
 
Posts: 10
Joined: 12 Dec 2015, 14:22
Country: Ireland
Has thanked: 1 time
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 5

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Arjan P » 27 Dec 2015, 13:48

Dazl123 wrote:Now to output to mixer it seems I take a feed from the back of each speaker to the desk
Am I correct thanks

There is no output from the DXR10 - only a THRU from the mono input (1). That's why several other solutions were offered above.
Arjan P
 
Posts: 231
Joined: 24 Dec 2012, 01:09
Country: Netherlands
Has thanked: 50 times
Been thanked: 57 times
Your Nord Gear #1: Nord Electro 3

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Dreamer » 28 Dec 2015, 10:46

It should be added that using the 2nd Link Out will make a DI box obsolete and gives a mono signal for main FOH mixing console. With this setup you cannot have main FOH output in stereo. For the latter, you have to use both channel 1 line inputs separately and use the Through outputs. Possible but too many cables for me and overkill in many cases.
Dreamer
 
Posts: 65
Joined: 10 Jun 2012, 09:19
Country: Germany
Has thanked: 4 times
Been thanked: 13 times
Your Nord Gear #1: Nord Electro 5

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby Dazl123 » 29 Dec 2015, 14:07

Arjan I took your advice I sent the nord directly to the mixer and took an AUX feed back to the speakers works well.
Don't want to end up stangled by leads ha ha.

Simple is better. ☺
Last edited by Dazl123 on 29 Dec 2015, 14:08, edited 1 time in total.
Dazl123
 
Posts: 10
Joined: 12 Dec 2015, 14:22
Country: Ireland
Has thanked: 1 time
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 5

YamahaDxr10 /cd2 organ.

Postby Bluesman999 » 03 Jan 2017, 01:41

Currently have a Dxr10 as a monitor with my electro 5 using a DI box taking a mono signal to FOH desk and the DI box thru link to the DXR in monitor mode. Thinking of investing in a C2D organ and a simple gigging piano. Want to run the organ in stereo to FOH and piano in mono to FOH (via DI boxes) then use the thru links from the DI boxes to the DXR to monitor sound from both instruments in mono. How can Ido this?
Bluesman999
 
Posts: 7
Joined: 01 Oct 2015, 21:12
Country: Great Britain
Has thanked: 2 times
Been thanked: 0 time

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby spradders » 03 Jan 2017, 11:59

Sorry to hijack this thread a little.... BUT ... does this mean I can use my dxr10 similar to a DI box? E.g. I plug L/R output from Nord into the L/R (jack) input on the DXR (to use as a stage monitor); then use it in Mono mode and take the XLR Link out straight to my FOH mixer? Hence giving me a mono balanced signal to the desk.
Is it Mic level signal from the Link output? Is it independent of (not changed by) the volume controls on the DXR?
Is that correct? I can't make sense of the Link diagram on the back of the DXR :-)
spradders
Patch Creator
 
Posts: 364
Joined: 31 Mar 2014, 14:34
Country: Great Britain
Has thanked: 131 times
Been thanked: 126 times
Your Nord Gear #1: Nord Stage 4

Re: Nord Electro 5 To Yamaha Dxr10 To Mixer setup

Postby spradders » 10 Jan 2017, 00:03

...any comment on my question above?
spradders
Patch Creator
 
Posts: 364
Joined: 31 Mar 2014, 14:34
Country: Great Britain
Has thanked: 131 times
Been thanked: 126 times
Your Nord Gear #1: Nord Stage 4

Next

Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 26 guests