General Discussion of the Nord Stage (EX), Nord Stage 2 (EX), Nord Stage 3, and Nord Stage 4 Synths, FAQ, Troubleshooting etc.

USB to iPhone

Postby Ricoflex » 13 Dec 2017, 02:55

Hi everybody,
I would like to connect my NS2ex to iPhone 6s via OTG cable to use it with GarageBand, will it work ?
Thanx for yr Help
Rgds
Riccardo
Last edited by Ricoflex on 13 Dec 2017, 03:01, edited 1 time in total.
User avatar
Ricoflex
 
Posts: 60
Joined: 26 Aug 2015, 11:40
Country: Italy
Has thanked: 28 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 2 EX

USB to iPhone


Sponsor
 

Re: USB to iPhone

Postby derrellpiper » 13 Dec 2017, 03:16

I'm not sure what an OTG cable is, but you'll need a MIDI interface like this one: https://www.amazon.com/IK-Multimedia-iR ... =irig+midi (note that there's a newer version of this but many people don't like it for various reasons). iConnectMIDI4+ is another higher end MIDI interface for iPads and iPhones.
Linnstrument, Pro 3 SE, Tempest, Prophet 10 & 12, Synclavier Regen, Cirklon 2, Torso T-1, Max/Ableton/Push 3, Kawai MP11SE, Pioneer Pro XDJ-XZ.
derrellpiper
 
Posts: 226
Joined: 11 Aug 2016, 19:12
Location: San Rafael, CA
Country: United States of America
Has thanked: 23 times
Been thanked: 42 times
Your Nord Gear #1: Nord Lead 3

Re: USB to iPhone

Postby PScooter63 » 13 Dec 2017, 03:48

Yamaha sells a Bluetooth MIDI adapter that works just fine between my iPad and my NE4. No cable needed.
User avatar
PScooter63
 
Posts: 394
Joined: 08 Nov 2013, 07:28
Location: Southeast US
Country: United States of America
Has thanked: 447 times
Been thanked: 134 times
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Electro 4

Re: USB to iPhone

Postby derrellpiper » 13 Dec 2017, 03:57

@PScooter63, very cool, what's it called? Speaking of wireless, I've also had good luck with these: http://pandamidi.com/midibeam/. I have one on my Lead 3.
Linnstrument, Pro 3 SE, Tempest, Prophet 10 & 12, Synclavier Regen, Cirklon 2, Torso T-1, Max/Ableton/Push 3, Kawai MP11SE, Pioneer Pro XDJ-XZ.
derrellpiper
 
Posts: 226
Joined: 11 Aug 2016, 19:12
Location: San Rafael, CA
Country: United States of America
Has thanked: 23 times
Been thanked: 42 times
Your Nord Gear #1: Nord Lead 3

Re: USB to iPhone

Postby maxpiano » 13 Dec 2017, 04:10

Ricoflex wrote:Hi everybody,
I would like to connect my NS2ex to iPhone 6s via OTG cable to use it with GarageBand, will it work ?
Thanx for yr Help
Rgds
Riccardo


You need a Apple Lightning to USB adapter (Camera connection kit) like this one here or the USB3 with charging port version here

@derrellpiper: the model of the MIDI Bluetooth adapter is Yamaha MD-BT01
Last edited by maxpiano on 13 Dec 2017, 04:15, edited 5 times in total.
User avatar
maxpiano
Patch Creator
 
Posts: 6243
Joined: 27 Jun 2011, 13:29
Location: Italy
Country: Italy
Has thanked: 447 times
Been thanked: 2194 times
Your Nord Gear #1: Nord Stage 3

Re: USB to iPhone

Postby MrTobbe » 13 Dec 2017, 04:59

If you only need a MIDI Connection, to control the synths and sounds in Garage Band, I believe the both cheapest and simplest solution is to get a Apple camera connection kit, lightning to USB adapter:

https://www.apple.com/it/shop/product/M ... ning-a-usb

This converts the Lightning connecter to a standard USB 2.0 port (the Lightning charging/sync cable that came with the iPhone won't work for this). Then you simply connect the Nord with the iPhone w Apple CCK, and a normal USB type A to type B cable, and you should have a 2-way MIDI connection between the Nord and the IPhone. Also be sure that the Stage 2 is set to a USB MIDI channel for the Global MIDI, external MIDI, and/or the other MIDI Parts you want to use.

If you OTOH want to record the audio out of the Nord Stage into GarageBad, you will need an iPhone-compatible audio interface.
I am using a Roland DUO Capture EX, which is very practical for iOS units, and it can run on three AA-batteries for portable recording, BUT it seems to have been discontinued. If you can find on, though, I highly recommend it. This interface still require the CCK Lightning adapter above, to worl with an iOS unit.

https://www.roland.com/global/products/duo-capture_ex/

The Nord audio outs of the Nord is then connected to the audio inputs of the Duo Capture EX, and if you still need MIDI connection with GaragBand, you also connect the Nord to the Duo Capture EX with standard Midi cables.

Then the most sophisticated solution, I think, would be to use an iConnectivity audio interfaces:

https://www.thomann.de/it/iconnectivity ... audio4.htm

It is one of the few audio interfaces that is made for iOS-units. It requires no Apple CCK adapter, and maybe more importantly - it also charges the iPhone when in use, if you use the supplied, special USB to lightning cable.

Then you connect the Nord to the iConnectAudio4+ with audio cables, and if you also want MIDI - standard MIDI cables, or a USB A-B cable between the Nord and the USB host port of the iConnectAudio4+
If you also connect a computer with the iCA4+, it can share both MIDI and Audio connection with the iPhone/iPad you use, so you can actually stream digital audio to and from the computer and iOS-unit - super cool! :) I don't know of any other device (than ofther iConnectivty units), that can achive this.

Nord Stage 3 sw73
Viscount KeyB Legend Live
Leslie 3300
Korg M3-88, fully expanded
Hammond E112
and a lot more stuff...

The author MrTobbe was thanked by 2 members, including:
RicoflexBio Floyd
MrTobbe
 
Posts: 107
Joined: 24 May 2012, 02:44
Country: Sweden
Has thanked: 5 times
Been thanked: 53 times
Your Nord Gear #1: Nord Stage 3

Re: USB to iPhone

Postby derrellpiper » 13 Dec 2017, 05:15

They're probably right, by the way, I forgot about the camera connection cable. I wanted MIDI for other reasons.
Linnstrument, Pro 3 SE, Tempest, Prophet 10 & 12, Synclavier Regen, Cirklon 2, Torso T-1, Max/Ableton/Push 3, Kawai MP11SE, Pioneer Pro XDJ-XZ.
derrellpiper
 
Posts: 226
Joined: 11 Aug 2016, 19:12
Location: San Rafael, CA
Country: United States of America
Has thanked: 23 times
Been thanked: 42 times
Your Nord Gear #1: Nord Lead 3

Re: USB to iPhone

Postby PScooter63 » 13 Dec 2017, 09:02

derrellpiper wrote:@PScooter63, very cool, what's it called?

MD-BT01, for standard 5-pin DIN MIDI jacks.
Yamaha also makes the UD-BT01, for USB-jacks.

Note, however, that Yamaha's native apps are not sufficient to "awaken" the bluetooth connection to non-Yamaha equipment (such as the Nord). For that, an app like MIDI Wrench (free), running in the background on your iDevice, does the trick (and includes some handy diagnostics that I tend to check anyway).
Last edited by PScooter63 on 13 Dec 2017, 09:02, edited 1 time in total.
User avatar
PScooter63
 
Posts: 394
Joined: 08 Nov 2013, 07:28
Location: Southeast US
Country: United States of America
Has thanked: 447 times
Been thanked: 134 times
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Electro 4

Re: USB to iPhone

Postby Ricoflex » 13 Dec 2017, 10:40

Thank you very much to everybody
User avatar
Ricoflex
 
Posts: 60
Joined: 26 Aug 2015, 11:40
Country: Italy
Has thanked: 28 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 2 EX

Re: USB to iPhone

Postby Ricoflex » 18 Dec 2017, 01:50

MrTobbe, I've found this one is it the same?

https://www.mercatinomusicale.com/mm/a_ ... 74184.html
Last edited by Ricoflex on 18 Dec 2017, 01:59, edited 1 time in total.
User avatar
Ricoflex
 
Posts: 60
Joined: 26 Aug 2015, 11:40
Country: Italy
Has thanked: 28 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 2 EX

Next

Return to Nord Stage Forum



Who is online

Users browsing this forum: No registered users and 51 guests