General Discussion of the Nord Stage (EX), Nord Stage 2 (EX), Nord Stage 3, and Nord Stage 4 Synths, FAQ, Troubleshooting etc.
by Mr_-G- » 12 Nov 2017, 21:18
Nordish wrote:Mr_-G- wrote:Do you have several midi channels ON? I.e. you can sometimes send a global and another one (at least in the NS2).
Use a MIDI Monitor to see what is coming out of your MIDI out that might be clogging the U220 buffer.
How should I do that during a gig? Any ideas? I am open to suggestions
I would suppose that it is not a "gig-thing" and whatever you do to fill the U220's buffer *could* be replicated at another time?
Did you check about the MIDI channels?
Did you get a MIDI monitor program and tried to play what you were doing when it happened?
-
Mr_-G-
- Moderator
-
- Posts: 4616
- Joined: 18 Aug 2012, 16:48
- Has thanked: 1475 times
- Been thanked: 1257 times
- Your Nord Gear #1: Nord Stage 2
-
- Sponsor
-
by Nordish » 12 Nov 2017, 23:16
At home i couldn't replicated the Problem. It's not just a gig thing I think.
The Midi Channels are ok
No I haven't
nord stage compact 3 (73)
Access Virus TI2 Darkstar
YAMAHA MOTIF Rack ES
KORG WS-SR
Roland U-220
-
Nordish
-
- Posts: 43
- Joined: 08 Jul 2011, 22:03
- Country:
- Has thanked: 0 time
- Been thanked: 20 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord Stage 2
-
by Nordish » 14 Nov 2017, 16:31
I am now in contact with the nord support. Really nicely! I will send my Global / Panel Parameters and they will check this and they will try it to fix it. Mega Support! Such a direct wire is sought in vain with other manufacturers.
Sorry, my bad english!
nord stage compact 3 (73)
Access Virus TI2 Darkstar
YAMAHA MOTIF Rack ES
KORG WS-SR
Roland U-220
- The author Nordish was thanked by:
- baekgaard
-
Nordish
-
- Posts: 43
- Joined: 08 Jul 2011, 22:03
- Country:
- Has thanked: 0 time
- Been thanked: 20 times
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord Stage 2
-
by Ecaroh » 18 Nov 2017, 14:28
A new bug (OS 1.26)?
Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.
P.S. I can also confirm this another bug of phaser being audible even when it’s set to 0.
EDIT: This bug has been reported to Clavia and I put it also on the bug sheet. They could re-produce it and will try to fix it asap.
Last edited by
Ecaroh on 20 Nov 2017, 19:10, edited 2 times in total.
- The author Ecaroh was thanked by 2 members, including:
- DanielD71 • baekgaard
-
Ecaroh
-
- Posts: 370
- Joined: 02 Jan 2011, 21:40
- Location: Finland
- Country:
- Has thanked: 35 times
- Been thanked: 65 times
- Your Nord Gear #1: Nord Stage 4
by luukvk » 20 Nov 2017, 20:12
My NS3C crashed today when I connected it to my laptop. It deleted most of my programs, and the programs that were still there were in a different order. Has anyone had this before? Almost all the synth presets are gone too. I have to factory reset everything and start over, which is a little disappointing after 3 months of programming.
-
luukvk
-
- Posts: 1
- Joined: 31 Jan 2015, 17:22
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Lead A1
by Dr Kananga » 28 Nov 2017, 11:29
Ecaroh wrote:A new bug (OS 1.26)?
Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.
I've also been experiencing this exact bug.
-
Dr Kananga
-
- Posts: 10
- Joined: 06 Apr 2013, 01:56
- Country:
- Has thanked: 5 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 2
by Ecaroh » 29 Nov 2017, 00:10
Dr Kananga wrote:Ecaroh wrote:A new bug (OS 1.26)?
Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.
I've also been experiencing this exact bug.
There'll fix with new OS soon... Don't ask how I know this
-
Ecaroh
-
- Posts: 370
- Joined: 02 Jan 2011, 21:40
- Location: Finland
- Country:
- Has thanked: 35 times
- Been thanked: 65 times
- Your Nord Gear #1: Nord Stage 4
by Ottomatic » 03 Dec 2017, 21:16
luukvk wrote:My NS3C crashed today when I connected it to my laptop. It deleted most of my programs, and the programs that were still there were in a different order. Has anyone had this before? Almost all the synth presets are gone too. I have to factory reset everything and start over, which is a little disappointing after 3 months of programming.
I had something similar happen this weekend although it was not connected to my computer when it happened. I have an NS3 HP76. I booted it up and most of my programs were unavailable with an "Unknown Error" message. The ones that were there were out of order. I did have a backup and I tried to restore from my backup and it crashed during the restore. Now it hangs about 1/3 of the way through the boot sequence and will not boot. I have a ticket in with Nord Support. Did you ever get a resolution or reason for your problem?
-
Ottomatic
-
- Posts: 24
- Joined: 07 Nov 2017, 16:22
- Country:
- Has thanked: 8 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 3
by DJKeys » 03 Dec 2017, 21:33
What version of code?
-dj
Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
-
DJKeys
- Patch Creator
-
- Posts: 2028
- Joined: 11 Apr 2011, 17:11
- Location: Las Vegas
- Country:
- Has thanked: 408 times
- Been thanked: 811 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
-
by Ottomatic » 03 Dec 2017, 22:16
DJKeys wrote:What version of code?
-dj
If you are asking me, it is 1.22.
-
Ottomatic
-
- Posts: 24
- Joined: 07 Nov 2017, 16:22
- Country:
- Has thanked: 8 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Stage 3
Return to Nord Stage Forum
Who is online
Users browsing this forum: Wolfgang T and 74 guests