General Discussion of the Nord Stage (EX), Nord Stage 2 (EX), Nord Stage 3, and Nord Stage 4 Synths, FAQ, Troubleshooting etc.

Re: NS3 Bug reports etc.

Postby Mr_-G- » 12 Nov 2017, 21:18

Nordish wrote:
Mr_-G- wrote:Do you have several midi channels ON? I.e. you can sometimes send a global and another one (at least in the NS2).
Use a MIDI Monitor to see what is coming out of your MIDI out that might be clogging the U220 buffer.

How should I do that during a gig? Any ideas? I am open to suggestions


I would suppose that it is not a "gig-thing" and whatever you do to fill the U220's buffer *could* be replicated at another time?
Did you check about the MIDI channels?
Did you get a MIDI monitor program and tried to play what you were doing when it happened?
User avatar
Mr_-G-
Moderator
 
Posts: 4610
Joined: 18 Aug 2012, 16:48
Has thanked: 1471 times
Been thanked: 1253 times
Your Nord Gear #1: Nord Stage 2

Re: NS3 Bug reports etc.


Sponsor
 

Re: NS3 Bug reports etc.

Postby Nordish » 12 Nov 2017, 23:16

At home i couldn't replicated the Problem. It's not just a gig thing I think.
The Midi Channels are ok
No I haven't
nord stage compact 3 (73)
Access Virus TI2 Darkstar
YAMAHA MOTIF Rack ES
KORG WS-SR
Roland U-220
User avatar
Nordish
 
Posts: 43
Joined: 08 Jul 2011, 22:03
Country: Germany
Has thanked: 0 time
Been thanked: 20 times
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Nord Stage 2

Re: NS3 Bug reports etc.

Postby Nordish » 14 Nov 2017, 16:31

I am now in contact with the nord support. Really nicely! I will send my Global / Panel Parameters and they will check this and they will try it to fix it. Mega Support! Such a direct wire is sought in vain with other manufacturers. ;-) Sorry, my bad english!
nord stage compact 3 (73)
Access Virus TI2 Darkstar
YAMAHA MOTIF Rack ES
KORG WS-SR
Roland U-220

The author Nordish was thanked by:
baekgaard
User avatar
Nordish
 
Posts: 43
Joined: 08 Jul 2011, 22:03
Country: Germany
Has thanked: 0 time
Been thanked: 20 times
Your Nord Gear #1: Nord Electro 3
Your Nord Gear #2: Nord Stage 2

Re: NS3 Bug reports etc.

Postby Ecaroh » 18 Nov 2017, 14:28

A new bug (OS 1.26)?

Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.

P.S. I can also confirm this another bug of phaser being audible even when it’s set to 0.

EDIT: This bug has been reported to Clavia and I put it also on the bug sheet. They could re-produce it and will try to fix it asap.
Last edited by Ecaroh on 20 Nov 2017, 19:10, edited 2 times in total.

The author Ecaroh was thanked by 2 members, including:
DanielD71baekgaard
User avatar
Ecaroh
 
Posts: 367
Joined: 02 Jan 2011, 21:40
Location: Finland
Country: Finland
Has thanked: 34 times
Been thanked: 65 times
Your Nord Gear #1: Nord Stage 4

Re: NS3 Bug reports etc.

Postby luukvk » 20 Nov 2017, 20:12

My NS3C crashed today when I connected it to my laptop. It deleted most of my programs, and the programs that were still there were in a different order. Has anyone had this before? Almost all the synth presets are gone too. I have to factory reset everything and start over, which is a little disappointing after 3 months of programming.
luukvk
 
Posts: 1
Joined: 31 Jan 2015, 17:22
Country: Netherlands
Has thanked: 0 time
Been thanked: 0 time
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Lead A1

Re: NS3 Bug reports etc.

Postby Dr Kananga » 28 Nov 2017, 11:29

Ecaroh wrote:A new bug (OS 1.26)?

Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.



I've also been experiencing this exact bug.
Dr Kananga
 
Posts: 10
Joined: 06 Apr 2013, 01:56
Country: Australia
Has thanked: 5 times
Been thanked: 0 time
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 2

Re: NS3 Bug reports etc.

Postby Ecaroh » 29 Nov 2017, 00:10

Dr Kananga wrote:
Ecaroh wrote:A new bug (OS 1.26)?

Yesterday I had an issue where B panel synth’s delay or reverb adjustments did not have effect. In other words if I turned for example reverb amount dial I could see parameter value change but it did not realize in sound. But if I saved program and went to another progran and back, then I could hear the difference. Strangely I haven’t come across with this issue earlier and I begin to think that could it be a new bug with OS 1.26.? I will report this to Clavia.



I've also been experiencing this exact bug.


There'll fix with new OS soon... Don't ask how I know this ;)
User avatar
Ecaroh
 
Posts: 367
Joined: 02 Jan 2011, 21:40
Location: Finland
Country: Finland
Has thanked: 34 times
Been thanked: 65 times
Your Nord Gear #1: Nord Stage 4

Re: NS3 Bug reports etc.

Postby Ottomatic » 03 Dec 2017, 21:16

luukvk wrote:My NS3C crashed today when I connected it to my laptop. It deleted most of my programs, and the programs that were still there were in a different order. Has anyone had this before? Almost all the synth presets are gone too. I have to factory reset everything and start over, which is a little disappointing after 3 months of programming.


I had something similar happen this weekend although it was not connected to my computer when it happened. I have an NS3 HP76. I booted it up and most of my programs were unavailable with an "Unknown Error" message. The ones that were there were out of order. I did have a backup and I tried to restore from my backup and it crashed during the restore. Now it hangs about 1/3 of the way through the boot sequence and will not boot. I have a ticket in with Nord Support. Did you ever get a resolution or reason for your problem?
Ottomatic
 
Posts: 24
Joined: 07 Nov 2017, 16:22
Country: United States of America
Has thanked: 8 times
Been thanked: 0 time
Your Nord Gear #1: Nord Stage 3

Re: NS3 Bug reports etc.

Postby DJKeys » 03 Dec 2017, 21:33

What version of code?

-dj

Nord Stage 3
Nord Wave 2
Yamaha U3
iMac i7 13.5.2
Studio One 5.5.2
Nektar T4
Drawmer DL 241
Focusrite ISA Two
Focusrite Clarett 8 Pre
User avatar
DJKeys
Patch Creator
 
Posts: 2023
Joined: 11 Apr 2011, 17:11
Location: Las Vegas
Country: United States of America
Has thanked: 407 times
Been thanked: 810 times
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Wave 2

Re: NS3 Bug reports etc.

Postby Ottomatic » 03 Dec 2017, 22:16

DJKeys wrote:What version of code?

-dj


If you are asking me, it is 1.22.
Ottomatic
 
Posts: 24
Joined: 07 Nov 2017, 16:22
Country: United States of America
Has thanked: 8 times
Been thanked: 0 time
Your Nord Gear #1: Nord Stage 3

PreviousNext

Return to Nord Stage Forum



Who is online

Users browsing this forum: IvanHucko and 39 guests