I control my NL4r from a kb controller which is set to transmit midi channel 1. It works as expected with other synths.
But the NL4r seems to respond to the keyboard controller no matter which channel the nord lead is on. I changed it
from ch1 to ch2 to ch3 etc - and the nl4r responds, which means it can't isolate the specific midi channel.
Why is it doing this and how can i change it so that it would only respond to a specific channel?
5 posts
• Page 1 of 1
Re: Nord lead 4 - midi seems like it's constantly in omni mo
Did you try changing the global midi channel on the NL4?
-
skintechnician - Posts: 75
- Joined: 04 Oct 2014, 03:29
- Country:
- Has thanked: 41 times
- Been thanked: 30 times
- Your Nord Gear #1: Nord Drum 2
- Your Nord Gear #2: Nord Lead A1
Re: Nord lead 4 - midi seems like it's constantly in omni mo
skintechnician wrote:Did you try changing the global midi channel on the NL4?
Yes. When i enter the midi settings, it's the first category. The screen shows 'G' and the midi channel number, and by pressing shift and rotating the data entry encoder i change the channel. But the nord responds no matter what channel i choose.
Re: Nord lead 4 - midi seems like it's constantly in omni mo
Hi zahush76,
Try setting NL4 four Parts as follows :
Part 1 to midi ch 2
Part 2 to midi ch 3
Part 3 to midi ch 4
Part 4 to midi ch 5
See if this helps.
Cheers,
Muziksculp
Try setting NL4 four Parts as follows :
Part 1 to midi ch 2
Part 2 to midi ch 3
Part 3 to midi ch 4
Part 4 to midi ch 5
See if this helps.
Cheers,
Muziksculp
-
Muziksculp - Posts: 215
- Joined: 25 Jan 2014, 02:14
- Has thanked: 5 times
- Been thanked: 51 times
- Your Nord Gear #1: Nord Lead 4
- Your Nord Gear #2: Nord Lead A1
Re: Nord lead 4 - midi seems like it's constantly in omni mo
Since Nord calls them SLOTS and not parts, it may avoid confusion in some if we continue to call them SLOTS
but, yes, zahush76, it would seem likely that you are not going fully into the MIDI MENU. It is not enough for you to set the Global midi channel, you must also set the individual SLOT channels, especially on the Rack version. That is where your problem lies.
Bless, Pablo
but, yes, zahush76, it would seem likely that you are not going fully into the MIDI MENU. It is not enough for you to set the Global midi channel, you must also set the individual SLOT channels, especially on the Rack version. That is where your problem lies.
Bless, Pablo
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by:
- Marlowes
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
5 posts
• Page 1 of 1
Return to Nord Lead / Rack Forum
Who is online
Users browsing this forum: No registered users and 15 guests