"resetting" NL2, if I recall correctly (not looking at manual or instrument right now) copies of the original 40 factory programs are embedded in stock ROM performances. Therefore, the restoration is a simple matter of copying those 40 programs, one at a time, into the original 40 locations. Somewhat tedious, yes, but by the time you get the first 4-5 done it becomes pretty simple.
Bless, Pablo
14 posts
• Page 2 of 2 • 1, 2
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: Nord Lead 2 faulty switches (buttons)
I bought a used Nord Wave, but I figure it has the same buttons as the Lead series so I'm bumping this thread.
A lot of the buttons on my Wave will double-trigger when pressed, i.e. if I tap the Osc waveform selection button once, the arrow might jump two steps ahead instead of just one to the next waveform in the rotation. Is this a common problem on Nords after a while? Should a good cleaning fix this?
A lot of the buttons on my Wave will double-trigger when pressed, i.e. if I tap the Osc waveform selection button once, the arrow might jump two steps ahead instead of just one to the next waveform in the rotation. Is this a common problem on Nords after a while? Should a good cleaning fix this?
- soundxplorer
- Posts: 23
- Joined: 26 Jun 2017, 18:51
- Country:
- Has thanked: 2 times
- Been thanked: 6 times
Re: Nord Lead 2 faulty switches (buttons)
pablomastodon wrote:Not sure where your research took you, but that is incorrect info. Those switches are very high-quality German brand, Marquardt, with gold-plated contacts and it is very simple operation to open them for cleaning purposes. First you'll have to have complete access to panelboard assembly. Remove all knobs, remove upper chassis, remove panelboard from underside of upper chassis. Then you will see tiny latches on the lateral sides of the switches. By squeezing slightly, these unlatch and the plastic cover will easily lift off to reveal the contacts beneath.
"Series 6450" is the Marquardt part designation, with different suffixes for differently colored switch covers. Your favorite websearch engine will be your friend in finding a source for these.
Bless, Pablo
Hi Pablo, I've been trying to resuscitate some of the buttons on my Nord Rack 2. Unscrewed everything, opened the damn thing but cant manage to lift the buttons from the base. Tried squeezing on the sides as you described, but nothing happens. Is there some type of other movement that I'm missing? Thanks in advance.
- nick_gva
- Posts: 1
- Joined: 03 Sep 2018, 18:15
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Lead 1/2/2x
Re: Nord Lead 2 faulty switches (buttons)
obsolete
Last edited by varignet on 25 Dec 2020, 18:23, edited 3 times in total.
Nord Lead A1, Korg Trinity 76 Pro, Kawai MP7SE, Guitars, Ukes
- varignet
- Posts: 208
- Joined: 29 Sep 2016, 23:08
- Location: London
- Country:
- Has thanked: 25 times
- Been thanked: 9 times
- Your Nord Gear #1: Nord Lead A1
14 posts
• Page 2 of 2 • 1, 2
Return to Nord Lead / Rack Forum
Who is online
Users browsing this forum: No registered users and 20 guests