Hi,
I have recently bought a Nord Stand Ex for my Electro 5 HP but I am having trouble attaching the crossbars. I have rechecked the instructions multiple times, making sure that I have the correct legs attached to the front/rear etc but everything should be correct.
The crossbars feel like they are two long and/or it looks as though they would fit with two nut rivets instead of the one there is on this model.
Can anyone help?
Katherine
16 posts
• Page 1 of 2 • 1, 2
Trouble fixing Nord Stand Ex to Electro 5 HP?
- The author kgillham was thanked by:
- Ricardo Sa Leao
- kgillham
- Posts: 2
- Joined: 13 Jul 2015, 15:11
- Has thanked: 4 times
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
Hej Katherine!
I was also amazed when I unpacked my EX Stand and tried to put it on my NS2.
You have to try turning the crossbars 180 degrees a couple of times until you get it right.
Some force is involved and you have to unscrew the lower parts of the legs quite a bit.
You might also need to grow a second pair of hands ...
/Vänligen
Michael in Scania
I was also amazed when I unpacked my EX Stand and tried to put it on my NS2.
You have to try turning the crossbars 180 degrees a couple of times until you get it right.
Some force is involved and you have to unscrew the lower parts of the legs quite a bit.
You might also need to grow a second pair of hands ...
/Vänligen
Michael in Scania
NE3HP, NP88, NS2, DPP1, NL2X, NL2X, NLA1, NL4, NE5D, NW2 (Collect Them All?), some classic Rolands, Arturias, a Waldorf, a Kurz, a WONOK3, a pile of guitars, a P-bass, loopers, amps and computers ...
I'm a gearslut!
I'm a gearslut!
-
Marlowes - Patch Creator
- Posts: 1342
- Joined: 14 Sep 2011, 12:10
- Location: Österlen, Scania
- Country:
- Has thanked: 1820 times
- Been thanked: 594 times
- Your Nord Gear #1: Nord Wave 2
- Your Nord Gear #2: Nord Lead 4
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
Marlowes/kgillham..same here of on the legs…. attached them to a NE5HP…. Looks like you kinda have to work them in….. they are almost too long .. i just hope with practice it might go easier… I know the instructions say you need the cross bars but I just might not use them.. What could happen? …. In my fender rhodes days, the legs were much easier to attach … BUT they were HEAVY ….. that being said .. I love the legs.. makes the NE5HP very solid .. fits in my NORD bag with the NOrd music stand … saves a trip or two into the gig…. I don't think I would trust a Nord on an X stand or any other stand.. the Nord is just took light … and on a busy stage one accidental bump and there it goes… what do you think Pablo about not attaching the cross bars?
Last edited by asandel on 13 Jul 2015, 18:05, edited 1 time in total.
- asandel
- Posts: 111
- Joined: 15 Dec 2014, 16:33
- Location: Cedar Grove, NJ
- Country:
- Has thanked: 21 times
- Been thanked: 5 times
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Nord Piano 3
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
asandel wrote: I know the instructions say you need the cross bars but I just might not use them.. What could happen? …
Better put those cross bars! Really it needs to be a triangular structure somewhere to give the setup stability.
- The author Mr_-G- was thanked by 2 members, including:
- Ricardo Sa Leao • kgillham
-
Mr_-G- - Moderator
- Posts: 4610
- Joined: 18 Aug 2012, 16:48
- Has thanked: 1471 times
- Been thanked: 1253 times
- Your Nord Gear #1: Nord Stage 2
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
I've used the Nord Stand EX with both my Stage 76 (classic) and Stage 2 76 for many years (and hundreds of gigs) without the crossbars. I too found assembly to be challenging and cumbersome. Often I'm in situations where set up and/or take down has to happen fast and there's just not enough time to struggle with them. While there is no arguing that your keyboard will be more stable with the cross bars attached, I have never encountered any issues or problems whatsoever while not using them. It may be different with an 88 since it's longer and heavier, but I've never owned one so I can't comment on that. Considering that the Electro 5 HP is slightly smaller (and much lighter) then the Stage 76, I would imagine that you should not have any major problems forgoing the crossbars. Good luck!
Brian
New Orleans
Brian
New Orleans
-Brian
Stage 2 HA76, Electro 6D 73
Gone but not forgotten: Stage 76 (Classic), Electro 2 73, Electro 3 73, Electro 5 HP
Stage 2 HA76, Electro 6D 73
Gone but not forgotten: Stage 76 (Classic), Electro 2 73, Electro 3 73, Electro 5 HP
- The author NolaNord504 was thanked by:
- kgillham
- NolaNord504
- Posts: 47
- Joined: 19 Aug 2013, 21:42
- Location: New Orleans, LA
- Country:
- Has thanked: 12 times
- Been thanked: 11 times
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Electro 6
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
Thank you so much everyone.
I would really like to try and attach the crossbars as they seem to give a lot more stability to the structure. Does anyone have any pictures of how they have managed to assemble these with their Electro 5 HP if they have managed it? It says on the Nord website they are compatible but I cannot see how!
I would really like to try and attach the crossbars as they seem to give a lot more stability to the structure. Does anyone have any pictures of how they have managed to assemble these with their Electro 5 HP if they have managed it? It says on the Nord website they are compatible but I cannot see how!
- kgillham
- Posts: 2
- Joined: 13 Jul 2015, 15:11
- Has thanked: 4 times
- Been thanked: 1 time
- Your Nord Gear #1: Nord Electro 5
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
The diagonal struts are purposely made to "not fit." You have to stress them slightly to force them to fit. This results in a MUCH stronger and more stable structure.
Bless,
Pablo
Bless,
Pablo
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by 2 members, including:
- asandel • Marlowes
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
For comodity reason, I have never used the cross bar as well without any stability problem on my NEx HP's.
- jbolazzi
- Posts: 15
- Joined: 29 Jun 2012, 10:31
- Country:
- Has thanked: 2 times
- Been thanked: 3 times
- Your Nord Gear #1: Nord Electro 3
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
I had the same problem with my Nord Electro 5HP and the Nord Keyboard Stand EX. I thought I bought the wrong stand, but it turns out it's the correct one. I understand the structure needs some "tension" to improve "stability" (vee video linked below at 5:02), but they've overdone it! So, after hesitating (I didn't want to damage my new keyboard stand because then I could not return if my solution didn't work out), I decided just to adjust a bit (with pliers!) the angles of the tops of the crossbars so they would fit better. Now I still have tension but it fits.
Hope this is helpful!
How to assemble your Nord Keyboard Stand
https://www.youtube.com/watch?v=7zpdOhJpM8o
Hope this is helpful!
How to assemble your Nord Keyboard Stand
https://www.youtube.com/watch?v=7zpdOhJpM8o
Last edited by Ricardo Sa Leao on 26 Jan 2017, 12:56, edited 1 time in total.
- Ricardo Sa Leao
- Posts: 1
- Joined: 26 Jan 2017, 12:40
- Country:
- Has thanked: 2 times
- Been thanked: 0 time
- Your Nord Gear #1: Nord Electro 5
Re: Trouble fixing Nord Stand Ex to Electro 5 HP?
When my 4HP was new, I tried leaving out the crossmembers exactly once, just to see the difference. Never again. Altogether too wiggly for me without them.
(With practice, deploying the crossmembers consumes less than one additional minute. Tearing down, less than another 30 seconds.)
(With practice, deploying the crossmembers consumes less than one additional minute. Tearing down, less than another 30 seconds.)
-
PScooter63 - Posts: 394
- Joined: 08 Nov 2013, 07:28
- Location: Southeast US
- Country:
- Has thanked: 447 times
- Been thanked: 134 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Electro 4
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 17 guests