output mono or stereo NE5?

[caneparelli]

sorry , but there is a mono output for both layer Part Upper and Lower Part ? NE5 only comes out in stereo ? no mono ( R or L ) ?

thanks

Paolo C.

[sh4wn]

The manual is your friend:

page 16

OUTPUT ROUTINGMODE lets you choose either
the default stereooption or the Partl: l, PartU : r setting. In stereo mode Part lower and
Part Upper will be routed to both outputs, in
stereo. With Partl: l, PartU : r activated Part
lower is routed to the left output and Part
Upper to the right, both being in mono.

[AinTziLLo]

...then to use the split / layer feature you must use two speakers... o_O

[pablomastodon]

I split mine at last weekend's gig, separating bass and piano outputs to the mixing board. Worked like a charm!

Pablo

[caneparelli]

[caneparelli]

The manual is your friend:

page 16

OUTPUT ROUTINGMODE lets you choose either
the default stereooption or the Partl: l, PartU : r setting. In stereo mode Part lower and
Part Upper will be routed to both outputs, in
stereo. With Partl: l, PartU : r activated Part
lower is routed to the left output and Part
Upper to the right, both being in mono.

I had this intuition , I was wondering if you can make out in both the mono channel R and L with single mono cable !?
The synth YAMAHA has the right output in Mono and combines both channels !!!

[AinTziLLo]

A lot of keyboard have a single jack output in order to send every sound (mono or stereo) to a single speaker... my Electro 3 do it... my Lead A1 do it too... it's very strange if is not possible on an Electro 5... is the Electro 5 the first Nord Keyboard that needs two speakers to work???

[Rudy Wendt]

Are you serious??

http://www.nordkeyboards.com/sites/defa ... 550x79.jpg

Wrong image at Nord's website then?

[caneparelli]

Gasp!!!
when I played in the rehearsal room with the pan she was away the sound.
I read the texts only on the body red, I never overlooking over the writing ...

I'm chump

[caneparelli]

page 20 of the istruction...