Hi all,
I did download few piano patch via Sound Manager few times.
But recently when I connect it, it always shows:
usb error: bulk pipe write failed
Today, I tried another new usb cable which works well on my DAW interface.
I'm trying to update from V1.3 to V1.42
But it failed again, when I turn it off and on again.
The panel shows as test mode...
Does anyone who experience this situation and how to wipe the old OS from test mode?
2 posts
• Page 1 of 1
How to restore OS from TEST MODE?
- Attachments
-
- IMG_1272.JPG (1.06 MiB) Viewed 571 times
-
- IMG_1269.JPG (4.25 MiB) Viewed 571 times
-
- IMG_1274.JPG (4.49 MiB) Viewed 571 times
- kevinlue
- Posts: 1
- Joined: 13 Apr 2017, 05:28
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Electro 5
Re: How to restore OS from TEST MODE?
Hi,
I suggest you disconnect any non-essential wires from both PC and keyboard. Ground loops can cause strange voodoo.
Broken USB cables are a big deal nowadays so I'd check another one, just to be sure.
Use a different PC. Maybe your PC's USB is unreliable.
If that doesn't fix it, I suspect it needs repair.
I suggest you disconnect any non-essential wires from both PC and keyboard. Ground loops can cause strange voodoo.
Broken USB cables are a big deal nowadays so I'd check another one, just to be sure.
Use a different PC. Maybe your PC's USB is unreliable.
If that doesn't fix it, I suspect it needs repair.
And I was worried - all the way down to the ground
When it comes to holding safety nets
Nobody seems to be around
When it comes to holding safety nets
Nobody seems to be around
-
offrhodes - Posts: 150
- Joined: 12 Dec 2015, 21:33
- Location: Munich, Germany
- Country:
- Has thanked: 17 times
- Been thanked: 30 times
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Electro 5
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests