Everything about the Nord Electro 2, Electro 3, Electro 4, Electro 5, and Nord Electro 6.

How to restore OS from TEST MODE?

Postby kevinlue » 13 Apr 2017, 10:21

Hi all,
I did download few piano patch via Sound Manager few times.
But recently when I connect it, it always shows:
usb error: bulk pipe write failed
Today, I tried another new usb cable which works well on my DAW interface.
I'm trying to update from V1.3 to V1.42
But it failed again, when I turn it off and on again.
The panel shows as test mode...

Does anyone who experience this situation and how to wipe the old OS from test mode?
Attachments
IMG_1272.JPG
IMG_1272.JPG (1.06 MiB) Viewed 569 times
IMG_1269.JPG
IMG_1269.JPG (4.25 MiB) Viewed 569 times
IMG_1274.JPG
IMG_1274.JPG (4.49 MiB) Viewed 569 times
kevinlue
 
Posts: 1
Joined: 13 Apr 2017, 05:28
Country: Taiwan
Has thanked: 0 time
Been thanked: 0 time
Your Nord Gear #1: Nord Electro 5

How to restore OS from TEST MODE?


Sponsor
 

Re: How to restore OS from TEST MODE?

Postby offrhodes » 16 Apr 2017, 19:10

Hi,

I suggest you disconnect any non-essential wires from both PC and keyboard. Ground loops can cause strange voodoo.
Broken USB cables are a big deal nowadays so I'd check another one, just to be sure.

Use a different PC. Maybe your PC's USB is unreliable.
If that doesn't fix it, I suspect it needs repair.
And I was worried - all the way down to the ground
When it comes to holding safety nets
Nobody seems to be around
User avatar
offrhodes
 
Posts: 150
Joined: 12 Dec 2015, 21:33
Location: Munich, Germany
Country: Germany
Has thanked: 17 times
Been thanked: 30 times
Your Nord Gear #1: Nord Stage 2 EX
Your Nord Gear #2: Nord Electro 5


Return to Nord Electro Forum



Who is online

Users browsing this forum: No registered users and 32 guests