Hi,
I'm struggling to make a convincing wood block sound. Does anybody have any good settings/examples I could use?
Thanks!
6 posts
• Page 1 of 1
Re: Wood Block Setting
Hi!
A while back I made a bank with 'acoustic' sounds and sets, (attached)
channel 3 of program #16 could perhaps be a starting point for you,
it's mainly based on noise ... so filter frequency + resonance is important, also the additional boost with EQ, and distortion
Cheers,
Albert
A while back I made a bank with 'acoustic' sounds and sets, (attached)
channel 3 of program #16 could perhaps be a starting point for you,
it's mainly based on noise ... so filter frequency + resonance is important, also the additional boost with EQ, and distortion
Cheers,
Albert
- Attachments
-
- acoustic set albert v11.nd2_bank
- (15.16 KiB) Downloaded 185 times
Last edited by wartaler on 14 Mar 2015, 12:01, edited 2 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular
- The author wartaler was thanked by 3 members, including:
- Marlowes • J_Beat • pablomastodon
- wartaler
- Moderator
- Posts: 738
- Joined: 19 Mar 2009, 18:32
- Country:
- Has thanked: 92 times
- Been thanked: 231 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
Re: Wood Block Setting
Albert,
The bank you posted appears to be blank when I load it. Can you re-post just in case?
Does anyone know what I may be doing wrong? I'm using a Roland UM-ONE Mk2 cable, all seems to work well...
The bank you posted appears to be blank when I load it. Can you re-post just in case?
Does anyone know what I may be doing wrong? I'm using a Roland UM-ONE Mk2 cable, all seems to work well...
- J_Beat
- Posts: 3
- Joined: 10 Mar 2015, 22:44
- Country:
- Has thanked: 1 time
- Been thanked: 0 time
- Your Nord Gear #1: Nord Drum 2
Re: Wood Block Setting
worked fine for me -- note that it is not a full bank though...
Bless,
Pablo
Bless,
Pablo
bun fyah weh fyah fi bun
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: Wood Block Setting
Sorry for the late reply,
I just remembered that on a ND2 with an older OS version installed, banks made on a later OS (my bank is made in OS3.00) will appear blank, (programs will sound as init) - the OS is displayed briefly when you power on your ND2...
So:
- If your ND2 has an older OS installed, download the latest from the Nord website: http://www.nordkeyboards.com/downloads/nord-drum-2 - connect both MIDI in and out, and run the updater on your computer,
- When/If you have the latest OS installed, and the bank still appears blank after uploading, perhaps delete it from your computer and download it again, also try some of the banks from the Nord website -
- Maybe also try if a fresh copy of Nord Drum 2 Manager v1.00 helps: http://www.nordkeyboards.com/downloads/ ... -2-manager
- If the OS update, or bank uploads fail, then perhaps your combination of computer OS, drivers, and MIDI interface can't handle the SysEx data stream to the ND2 - I think -
- (in that case you need to retry by using a different computer system / other MIDI interface)
Hope it helps,
Cheers,
Albert
I just remembered that on a ND2 with an older OS version installed, banks made on a later OS (my bank is made in OS3.00) will appear blank, (programs will sound as init) - the OS is displayed briefly when you power on your ND2...
So:
- If your ND2 has an older OS installed, download the latest from the Nord website: http://www.nordkeyboards.com/downloads/nord-drum-2 - connect both MIDI in and out, and run the updater on your computer,
- When/If you have the latest OS installed, and the bank still appears blank after uploading, perhaps delete it from your computer and download it again, also try some of the banks from the Nord website -
- Maybe also try if a fresh copy of Nord Drum 2 Manager v1.00 helps: http://www.nordkeyboards.com/downloads/ ... -2-manager
- If the OS update, or bank uploads fail, then perhaps your combination of computer OS, drivers, and MIDI interface can't handle the SysEx data stream to the ND2 - I think -
- (in that case you need to retry by using a different computer system / other MIDI interface)
Hope it helps,
Cheers,
Albert
Last edited by wartaler on 23 Apr 2015, 16:49, edited 3 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular
- wartaler
- Moderator
- Posts: 738
- Joined: 19 Mar 2009, 18:32
- Country:
- Has thanked: 92 times
- Been thanked: 231 times
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests